Dear Customer, Thank you for purchasing the mobile phone. Kindly read this user manual carefully to learn about key functional characteristics and operational methods of this mobile phone. The mobile phone is a dual SIM, dual standby phone that supports high-speed Internet through GPRS and enables you to surf on the WAP network with comfort and ease. It also has T-Flash (storage) card slot for carrying all the extra data you need.
CONTENT 1. POINTS OF ATTENTION ON SAFETY ......................................................................................................... 4 2. YOUR MOBILE PHONE................................................................................................................................... 6 2.1 SCREEN ..............................................................................................................6 2.2 STATUS ICONS ...................................................................
4. COMMON FUNCTIONS ................................................................................................................................. 15 4.1 MAKE A CALL ..................................................................................................15 4.2 VOLUME ADJUSTMENT .....................................................................................16 4.3 ANSWERING A CALL .........................................................................................16 4.
1. Points of attention on safety IMPORTANT! Please read these instructions carefully and follow them implicitly in case of any dangerous or illicit situations. Note driving safety It is strongly recommended that you do not use a mobile phone when driving. Please use the personal hand free package when a call is inevitable.
In a hospital When using it in a hospital, you should be subject to the relevant rules specified by the hospital. Make sure your mobile phone is switched off when medical equipment is nearby. Any wireless transmission equipment, mobile phones included, will affect its performance. Other electronic equipment may be affected as well. If you have any question in this regard, please consult relevant doctor or equipment supplier directly.
Make sure your mobile phone is powered on and is in the service, if you would like to make an emergency call number such as 112, pressing the dial key and confirm your location, simply explain what has happened, and don’t terminate the call without any permission. Note: Like any mobile phone, it may not be supported due to the network coverage and wireless signal transmission. What’s more, some networks even don’t support the 112 emergency call services.
2.
3. Start to Use 3.1 Insert SIM Card PIN (personal identification number), PIN2, PUK (personal unlock key), IMSI (international mobile subscriber identification) number, network information, phone book and SMS (short message service) and other data are stored in your SIM card. Steps: 1 Hold the power key to turn off your mobile phone, and remove the battery door and then the battery.
SIM card holder. The operations are as follows: 3.2 Insert T-Flash (Storage) Card NOTE: Pushing the T-Flash card carefully with the metal surface downwards and move it into the groove of the T-Flash card holder. 3.3 Battery & Charge Indication of battery power Your mobile phone can monitor and display relevant information on the battery.
corner of the screen. 2 The screen will display “Low Power” when the battery power is inadequate. If you have selected the prompt tone of any mode out of the scene modes, the mobile phone will also give out a warning prompt tone. 3 When the battery is charged, the power indicator of the battery icon will be constantly changing until the battery is full.
Points of attention on use of battery 1 Be sure to switch off the mobile phone before you remove the battery. 2 Please use it carefully. A short circuit will occur if the positive pole (+) and the negative pole (-) of the battery is connected with a metal object (for example, a coin or clip), it may do damage to both the battery and the metal object.
9 10 11 12 13 14 be stopped using immediately. Please clean your skin or clothes immediately with soap and clear water if they contact leaking electrolyte, and wash your eyes completely with clear water if any electrolyte splashes into. In case of any injury caused by incorrect charge, only original battery is allowed to be charged. Don’t use the li-ion battery when the temperature is extremely low, for the maximum standby/call time is not available at a low temperature.
the instruction “Settings->Security settings>Change password” or “Settings->Security settings >SIM1/SIM2 security settings ->Change password” to change the PIN code, the PIN2 code as well as the mobile phone lock password. Mobile phone password The mobile phone password is the same as the mobile phone lock password, which could prevent unauthorized use of your mobile phone as well. The mobile phone password preset by the manufacturer is 1122.
PUK code The PUK code (the PIN unlocking password, 8 digits) is used to unlock the locked PIN code. The PUK code is provided by the manufacturer together with the SIM card. If you have entered the PUK code incorrectly for ten times, the SIM card will be invalidated. You need to ask your network operator for a new card. PIN2 code The PIN2 code (4~8 digits) is provided together with the SIM card, which is used to set the fixed dial and other functions.
4. Common Functions 4.1 Make a call 1 Enter the area code and phone number under the standby mode, and press the send key to dial the number you have entered. 2 Press the power key to end the call. International call Press the * key twice continuously, and you will see the “+”. Enter the country code, area code and phone number, pressing the dial key.
4.2 Volume adjustment You can adjust the call volume simply by pressing the up or down volume key during a call. 4.3 Answering a call 1 Press the Send key to answer an incoming call. 2 Press the power key can end the call. 3 Press the power key to reject an incoming call. 4.4 Options in a call A big number of control functions are available for you during a call.
5. Menu Guide Here we have listed the available functions, after browsing you will have a good understanding of how to operate your mobile phone. 5.1 Message 5.1.1SMS The SMS function is a network service. You may need to apply to the network operator first before you can send and receive a short message. Your cell phone supports the short message sending function. Short messages are sent to network SMS center first and then sent to subscribers.
Note:When you send a short message through SMS network, "Message sent" will be displayed on the screen. That is to say, the phone has sent the message to the message center mailbox set by your phone. But that isn't to say, the specified user has received the message. For more detailed information about SMS, please contact your network operator. Write Message You can create a message in this menu.
5.1. Send only: Send the message directly. 6.2. Send To Many Select: Select more receivers to send. 7.3. Save:Save the messages to the Outbox directly. 8.4. Send by groups:Send the message to the select group. Note:Picture message function can be used only when your network operator or service supplier supports the function. Picture messages can be received and displayed only by the phone featuring picture message function. However, the normal display of some picture messages is supported by the phone.
Drafts Select “Save” when you want to send a short message, then the message will be stored in draft box. The message failed to send will be also stored in drafts box, and relative operations can be implemented. SMS settings Message setting of SIM card 1/2: You can set some parameters of messages in this menu. Parts of setting menu of SIM card 1/2 are separate. 【Profile setting】 :To set the name of a profile, SMS center number, message validity period, and message type.
over the limit, the phone can not receive this multimedia message. The display effect of multimedia messages may vary with different receiving equipment. Note:You can use this function only when the service is supported by your network operator or service supplier. Only the device featuring multimedia or Email can receive and display a multimedia message. For details, please contact the network operator. Write message 【To】:Enter the phone number or Email address of the receiver.
You can view the received multimedia message in the inbox and perform the following operations: ・◈ View: To view a multimedia message, and save the attachment of picture or others in the multimedia message. ・◈ Reply: To reply a multimedia message to the sender directly. ・◈ Reply by SMS: To reply through SMS. ・◈ All: To reply all through MMS. ・◈ Forward: To forward the multimedia message to others. ・◈ Delete: To delete current multimedia message. ・◈ Delete all: To delete all multimedia messages in the inbox.
forwarding, deleting, deleting all, storing in template, viewing message details and using item can be implement. Templates Up to 5 preset multimedia messages have been set in the phone. Operation of viewing, viewing message details, getting new message from template and using item can be implement. MMS settings You can set parameters for MMS or view the memory status in this menu. For detailed information on MMS parameters, please contact your network operator.
【Read report】:Send, do not send, inquire. 【Delivery report】:Enable/disable delivery report. Filter:Set “Anonymous sender” and “Advertisement” to allow ro return messages. Server profile:You could set MMS Parameter, and the details should be got form your network operater. Memory status:You can check the phone used rate, used and unused space. 5.1.3 Chat You can chat in two chat rooms with ones specified phone number. The conversation between you with him or her will become more convenient. 5.1.
SIM card 1/2 voice mail server: Edit:To edit voice mail name and server number. Press OK to store your number. Connect to voice:To dial the voice mail server number stored in your voice mail server number list. Tip: Under the standby condition, you can call the voice mailbox number by long pressing the key "1" after you have set the voice mailbox number. 5.1.6 Broadcast message Cell broadcast is a service provided by the network operator to send messages such as weather forecast, traffic status, etc.
phone number, home number and office number), company name, email, fax number, birthday, photo, ring tone, video connect and group(providing five mode: family, friend, important, colleague and others); each contact save in the SIM card only contains name and phone number. You can input at most 1000 contacts in the contacts saved in the mobile phone,for volume of Contacts saved in SIM card, it depends on the SIM card. 5.2.
【Fields】:To select the display item in phonebook and add display item in the record interface. 【My vCard】:To edit or send your name cards. 【Owner number】:To view and edit the own number 【SOS number】:To edit SOS number of SIM card 1/2.(SOS number need be supported by SIM card, consult your network operator for details.) 【Caller groups】:You can set melody, caller picture, video connect and group member, etc. to five groups. 5.3 Call center 5.3.
Note: The actual call and service time in the service operator's bill may vary. It depends on such factors as network function, accounting rounding-off and tax. For details, please contact your network operator. 【Call cost】:Requires the support of the network operator. Last call cost:To view the cost of the last call. Total cost:To view the total cost of all calls. Reset cost:To reset cost record of all calls. (Please enter PIN2 for this function.
【Call waiting】 :To set functions like activate/deactivate and enquiry call waiting. During call holding and making multi-party calls, this function should be activated first, and network support is required for the specific implementation of the function. 【Call divert】:It is a network function that can only be used when you apply for this service of the network operator. The function can divert calls that satisfy the conditions to the other caller's phone number you have designated.
【Call barring】 1 Outgoing calls All calls:To restrict all outgoing calls. International calls:To restrict international outgoing calls. International calls except to home PLMN:While you are abroad, you can only call the numbers of the country (where you are) and your home country (at which your service supplier is located). 2 Incoming calls: All calls:To restrict all incoming calls. When roaming:To restrict all incoming calls except the numbers from your local service area.
B. Group: Add all numbers in an appointed group into the blacklist. C. No Number In Phonebook:Add all numbers not saved in SIM card or the phone into the blacklist. 【Red List】: A. Single:Add a single number into the red list. B. Group:Add all numbers in an appointed group into the red list. C. No Number In Phonebook:Add all numbers saved in SIM card or the phone into the red list. 【Time Splitted Firewall】:You can set a certain period to enable the firewall. 5.3.
5.4 setting 5.4.1 User profiles: Various profiles are provided for your phone. Personalize your phone according to your preference, and then start a profile desired. The profiles available are General, Meeting, Outdoor, Indoor, Headset, Bluetooth and Saving. In each profile, you can set one of the following options: Tone setup:To set the tone for incoming calls of SIM card 1/2, alarm, power-on (except Bluetooth mode), power-off, messages of SIM card 1/2 and key press.
5.4..2 Shortcuts Setup: Edit shortcuts: Select any one shortcuts and press the left soft key
Set the Signal LED and the brightness and time of LCD backlight. Sky Menu Setting: Main Menu Setting:Set the 3D effect of main menu. List Setting:Set the 3D effect of menu list. Switch setting:Set the 3D effect of interface switching. 5.4.4 Phone Setup: Dual SIM settings: Dual cards enable:Open card 1 and card 2 Only SIM card 1: Open card 1 Only SIM card 2: Open card 2 Time and date:To set the current time, date and the display format. Set the city:To set the home city.
Preferred input methods:To set the default input method according to your operation habit. Tone Setup: Cover open: Set the tone when cover open. Cover close: Set the tone when cover close. Wallpaper Tone: Set the wallpaper tone when change the wallpaper. Handwriting: To set the pen speed and pen color. Pen calibration: You should do pen calibration, when it isn’t accuracy that the handwriting pen knocks on some position. Please complete the pen calibration according the prompt on the screen.
5.4.6 Security setup: SIM card 1/2 security setup SIM card 1/2 lock:To unlock or lock SIM(PIN). Fixed dial:This function may need the support of SIM card and network operator. When this function is activated, you can only dial the fixed numbers in the fixed dial list. To activate the fixed dial, enter the PIN2. Change password:Change the PIN/PIN2 password of SIM card 1. PIN(PIN1) and PIN2 code can be get from network operator.
5.4.7 Bluetooth: 【Power】:Activate/deactivate Bluetooth. 【Inquiry audio device】:Search for Bluetooth devices. 【My device】 :Display device model when connected. 【Active device】:Display the model of online device. 【Settings】:Setting the parameters when Bluetooth is connected. Visibility: Enable/disenable. Device name: Change the displayed name of this phone device Authentication: Enable/disenable. Audio path: Set voice to the phone or to handsfree device.
5.5.1 K-Music List The music stored in phone and memory are listed in this menu. 5.5.2 Audio player The operating system above WIN2000 do not need to install the drivers. You need not power-off the phone when download songs. When the phone is connected to PC, it will display USB setting interface. Press the option of “Storage device”, then the PC display the message of found new hardware and update one mobile Disc.
5.6 Multimedia 5.6.1 Camera With this function, you can use the built-in camera of the phone to take a photo, or adjust the camera settings. Photos generated by the camera are in JPG format. If they have been downloaded to your PC, view them with the right software! When the phone has insufficient memory space for new photos, you should delete some old photos or other files in the "File Manager" function list to release memory space for new pictures. ・◈ 【Photos】 :To view a saved photo.
Record:Record the current channel and store. 5.6.3 Video player Support avi , 3gp format’s video. The following operation can be performed to the selected video file of .avi format: ◈ Play: To play a video file. ◈ Transfer: To transfer a video file to the desired application. ◈ Rename: To rename a video file. ◈ Delete: To delete the selected video file. ◈ Delete all: To delete all video files. ◈ Sort: To sort video files by desired method.
5.6.5 Image viewer The shot photos are stored in the image viewer. Descriptions of image viewer options: ◈ View: To view a photo. ◈ Browse mode: To select the mode for browsing photos. ◈ Transfer: To transfer a photo to the desired application. ◈ Rename: To rename the selected image or photo. ◈ Delete: To delete the selected photo. ◈ Delete all: To delete all photos. ◈ Sort: To sort photos by the desired method. ◈ Preferred storage: To set the storage directory for photos. 5.6.
5.6.7 Slide show Play the selected picture by slide. 5.7 Organizer 5.7.1 Alarm The time format of the alarm clock is the tame with the format in the clock. The alarm clock can work even if the phone is switched off as long as there is enough power in the battery. Alarm time, snooze time-out and alarm tone can be set independently for every alarm. The phone will alarm when the time reaches the set time and current time and date will display on the screen.
Jump to date:Move the cursor to the calendar of the specified date. Go to weekly view: To view the calendar by weekly. 5.7.3 Calculator Eight operators, i.e. “+”, “-”, “×”, “÷”, “m+”, “m-”, “mc”, and "mr”, are provided. Choose the Clear or press the right soft key to clear items entered. Long press the Clear or long press the right soft key to clear all content. Press the “Ok” to show the result of calculation.
cell phone will remind you with ring once the time is up, and it will display the contents of the memo settings. 5.7.7 World clock View the corresponding to the time zone of countries in the world by the direction keys. 5.8 Internet 5.8.1 STK STK is a value added service provided by your network provider. The display of function menu may differ according to different SIM cards. 5.8.2 WAP This function allows you to acquire or visit diversified services on the Internet through message or network.
【Input address】 :Provide user-defined inputting web address. 【Service inbox】 :Save the PUSH messages received by the phone. 【Settings】:Set parameters of WAP browser. Please consult your network provider for details of the parameters. Select SIM:Those options include “always inquire, SIM card 1 and SIM card 2”. Edit profile: To edit and enable the profile function. Browser options: To set the wait time and whether to show images. Display the address list and select image can be performed.
◈ ◈ ◈ ◈ ◈ Open: To open the selected file stored. New Folder: To create a folder. Format: To format the memory. Rename: To rename the memory. Details: To view the details of memory. Caution: You will lost all data stored in the memory after format! 6. Common Problems & Troubleshooting Before contacting the after-sales service provider, conduct the following simple checks and this may save your unnecessary time and expense on repair.
Enter PIN. You have selected the option of entering PIN for each start of the Poor calling quality Short standby time SIM card error Unable to dial out mobile phone, and so you must enter the PIN code (When the mobile phone is first used, the PIN code on the SIM card must be entered). Enter the PUK code. Wrong inputting of the PIN code will lock up your mobile phone, and you should use the PUK code provided by the network operator to launch it again.
Please confirm whether the call barring function has been activated. Please confirm whether the fixed calling function has been activated. Caller unable to contact you Unable to charge Poor contact. Check whether the plug has been connected in place. Charging on the condition that the temperature below -10º C or above 55º C. If the battery or charger has been spoiled, change it for a new one.
1. The information above has been checked; our company reserves the hermeneutic power to any print errors or misunderstanding on the content. 2. Please note that any technology improvement will be added into new versions of instruction manual without any prior notice. The product appearance and color are subject to the actual appliance. The colour of the mobile phone in the sales package may differ from that shown in this user manual and on the packaging. Enhancements may vary by market.