Languages: English Italian German French Spanish Dutch
User manual Zero Limits GSM, GPRS digital mobile phone
Content Content SAFETY PRECAUTIONS ..............................................................................................................1 HEALTH & SAFETY INFORMATION ............................................................................................3 GETTING STARTED: Front and rear view of Zero Limits…….………………………………………………………........................................9 Technical specifications………………………………………………………………………………………….
Add new contact……………………………………………………………………………………………………………………………24 Copy all……………………………………………………………………………………………………………………………………..…24 Delete……………………………………………………………………………………………………………………………………….…24 Caller groups…………………………………………………………………………………………………………………………..……25 Extra numbers………………………………………………………………………………………………………………………………25 Phonebook settings……………………………………………………………………………………………………………………….25 Caller picture………………………………………………………………………………………………………………………………..
Dual SIM settings……………………………………………………………………………………………………………………….37 Phone setup…………………………………………………………………………………………………………………………….…37 Bluetooth……………………………………………………………………………………………………………………………….….40 Network setup……………………………………………………………………………………………………………………………42 Security setup…………………………………………………………………………………………………………………..…….….42 Restore factory settings……………………………………………………………………………………………………..……....44 Shortcuts ………………………………………………………………………………………………………………………………..
SAFETY PRECAUTIONS Please read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Switch off the phone in the vicinity of chemical plants, gas stations and other locations containing explosive objects. Keep the phone far away from children. When driving, please use the hand free calling device to ensure safety. Please park the car at roadside for communication unless in emergency.
Charge the phone in well-ventilated environment and keep away from inflammable and high explosive articles. To avoid demagnetization, keep the handset away from magnetic substances, such as magnetic discs or credit cards. Keep the phone away from liquid. If soaking or erosion occurs, take the battery out and contact the supplier. Avoid using the phone in too high or too low temperature environments. Never leave the phone exposed under direct sunlight, in high humidity or in a dusty environment.
Waterproof IP57, one meter deep for thirty minutes Phone can be used with rain and splash water. Please make sure battery cover, rubber, earphone and USB cover are completly closed. SOS: In case of emergency, please dial 112 to search the local network service or the default SOS contact saved. HEALTH & SAFETY INFORMATION BATTERY CARE Your device is powered by a rechargeable battery. When the electric quantity is low, please re-charge the battery.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the polarity; (+) and (-) terminals of the battery (metal stripes on the battery). This might happen, for example, when you have a spare battery or magnetic objects in the vicinity. Short-circuiting the terminals can damage the battery or the connectors. Damaged batteries can damage or ruin components ( eg. Plastics ).
IMPORTANT INFORMATION ON SOS FUNCTION Mobile phones such as this unit use radio signals, the mobile phone network, the terrestrial network and user-programmed functions. This means that connection in all circumstances cannot be guaranteed. Therefore you should never rely solely on a mobile phone for very important calls such as medical emergencies.
protected medical apparatus. Consult a doctor or the manufacturer of the apparatus to determine if it has adequate protection against external radio signals, or if you have any question. If notices have been put up at health care facilities instructing you to turn off the unit while you are there, you should comply. Hospitals and other health care facilities sometimes use equipment that can be sensitive to external radio signals. PACEMAKER Pacemaker manufacturers recommend a distance at least 15 cm.
VEHICLES Radio signals can affect electronic systems in motor vehicles (e.g. electronic fuel injection, ABS brakes, automatic cruise control, air bag systems) that have been incorrectly installed or are inadequately protected. Contact the manufacturer or its representative for more information about yr vehicle or any additional equipment. Do not keep or transport flammable liquid gases or explosives together with the unit or its accessories.
Areas with risk for explosion are often – but not always – clearly marked. This also applies to below decks on ships: the transport or storage of chemicals; vehicles that use liquid fuel (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powder. EMERGENCY CALLS IMPORTANT! Mobile phones such as this unit use radio signals, the mobile phone network, the terrestrial network and user-programmed functions.
precaution for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a “hands-free” device to keep the mobile phone away from the head and body. 3.
TECHNICAL SPECIFICATIONS System： GSM 900/1800 MHz Network support： GPRS、WAP GPRS, WAP Size： 120*60*18mm Talk time：about 5 hours (determined by practical network condition) Standby time： about 300 hours (determined by practical network condition) Screen parameters：screen size 1.
2. Right soft key 3. Dialing key 4. End key Perform the function indicated on the right bottom line of the display i.e back, delete etc. Make or answer a call. In Idle mode, press this key to browse the call history (recently dialed, missed and received calls) Press and hold to switch the phone on or off End a call In the menu mode return to idle screen. 5.
idle mode you can unlock and lock the keypad. 8. # key In the idle mode pressing the # key for a long time can activate or deactivate the Silent mode. 9. Number keys Enter numbers, letters and special characters 10. Left side key Charger interface and an earphone interface 11 Torch key & volume key The torch can be turned on by pressing the upper side key; SOS (red botton on back of the phone) One-touch dialing emergency key 12.
SIM card 1 indicates signal strenght, the more strips, the stronger the signal is. SIM card 2 indicates signal strenght, the more strips, the stronger the signal is.
Vibration Vibration and/or ring Ringing after vibration Headset connected Bluetooth mode GPRS network Power Level Full battery power level Half battery power level Quarter battery power level Empty battery power level A power level shortage will trigger an alarm tone. The mobile phone will turn itself off automatically after a few minutes.
GETTING STARTED INSTALLING AND REMOVING BATTERY Gently push the battery into the battery slot, ensuring the metal contacts of the battery are faced upwards and in the position to be in contact with the metal contacts of the phone. Insert the battery cover by gently pushing it upward until in place.
Removing the battery Turn off the mobile phone before taking out the battery. Turn the screws of the battery cover 90º counter clockwise (screw slots from a vertical into a horizontal position); best by using a screw driver or a coin. into a horizontal position); best by using a screw driver or a coin.
Battery performance The standby time of the mobile phone decreases with the use of Bluetooth, torch etc. The standby time of mobile phones decreases in areas with no network. Please also note that Dual Sim phones have a higher consumption than single Sim phones. Charging 1. Insert the USB charger in the multi-function jack (left upper side of the mobile phone) 2. Insert the charger plug in a power socket. 3.
Charging 1. Please fully charge the battery before first using the phone. 2. Please ensure you charge the mobile phone at room temperature. 3. Avoid charging over long periods as it reduces the lifetime of the battery. 4. When battery power is low the phone can not be turned on, keep under charge until the screen resumes indication of power in the battery. 5. Make sure that the standard voltage and power match the voltage and power indicated on the charger. 6.
INSTALLING AND REMOVING SIM CARD How To Install Before installing the phone must be turned off and not connected to battery charger or any other accessory. Gently slide downwards the SIM card into the metal slot until the card is in place. Please ensure that the cut angle of the card corresponds to the slot. Notice： SIM card 2 message settings are the same as SIM card 1 message settings.
SWITCH THE PHONE ON AND OFF Switch on 1. Open the phone. 2. Press and hold 3. If necessary, enter the PIN and press . Switch off 1. Open the phone. 2. Press and hold: MAKE A CALL 1. In Idle mode, enter an area code and phone number 2. Press [ ]. Press to adjust the volume: 3. Press [ ] to end the call.
Please note: If the other party has an automatic switch-over extension number, please input a switchboard number and then input ‘P’ and the extension number (or the extension number is saved in the telephone directory through ‘P’ to make a call by the saved number with ‘P’), put through the switchboard to automatic switch over an extension set (number after P).
Please note The maximum length of input phone number is 40, the front number is replaced when inputting over 40 digits. Telephone directory call Enter the telephone directory to find a contact; select a number to make a call; press the dial key to select a corresponding SIM card to make a call. ANSWER A CALL 1. When the phone rings, press 2. Press [ [ ]. ] to end the call. Use the speakerphone feature During a call, press right soft key Press [ ] and to activate the speaker.
1. PHONEBOOK 1.0 How to save a number 1. In Idle mode, enter a phone number and press “Save” 2. Select Save → you are given the options: Sim1 / Sim 2/ phone memory. Chose one. 3. If you chose to save on the phone Phone, you can select select a number type. 4. Specify contact information. 5. Press to save the contact. Phonebook – how to search for a contact 1. In Idle mode, press . 2. Enter the first few letters of the name you want. 3. Select a contact. 4.
1.2 Search contact Eligible records are found in the telephone directory in a name mode. 1.3 Add new contact Add a new record to SIM card 1, the SIM card 2 or the mobile phone from the telephone directory. Newly added records to the phone memory not only can display name, phone number, home telephone number, company name, E-mail address, company telephone number, fax number and birthday, but also the following contents: Caller picture： set individual incoming call picture for a phone number.
1.6 Caller groups The incoming call group has five preset groups of friend, family, colleague and others, and you can edit the group name, the incoming call ring, the incoming call picture and group members in any group. 1.7 Extra numbers You can set the following numbers in the menu: own number： SIM card 1/ SIM card 2 own number. Edit and set the name and the own number, if the name is input, the standby interface displays the name by turning on the own number display.
key. Notice，the size of the incoming call picture is less than 10K-20K. 2.0 Caller ringtone Select your favourite music from the mobile phone as your incoming call ring. 2. MESSAGES 2.1 Text message Write message Enter submenu short message to write a short messages. Press ‘option’ for the following choices： Select the SIM card 1/and SIM card 2: you can execute operations of sending, saving and sending, saving, sending to contacts and group sending after ending the message.
Insert bookmark:insert a bookmark. Input method： many input methods for selection. Please note: short message centers in some areas don’t support SMS with more than 70 characters. Inbox Enter the inbox submenu to check SMS received for SIM card 1 or the SIM card 2.
Templates 10 useful phrases which can be edited or deteted are saved on the mobile phone. SMS settings The short message settings include SIM card 1 information settings and SIM card 2 Information settings. You need to adopt corresponding setting before using the short message function. Enter an SIM card 1 information setting submenu to select the following settings: mode settings： please contact with local network operator to obtain a short message service center number.
multimedia function, which can transfer different kinds of multimedia information like text, images, sound, etc. The MMS service needs the support from your network operator. Please make sure that your SIM card supports the service or consult your network operator before using the MMS service. The mobile phone supports the MMS function and can reveive or send multimedia information by setting the necessary MMS parameters.
Delete All: remove all the numbers from the Recipients list if there are more than two contacts selected. The subject of the multimedia message can be blank; the subject name will be shown as “no subject” if there is no subject written for the MMS. MMS text contents can be edited by selecting “0 Slide” and press “Edit”.
Remove text: the MMS text can be deleted once. You can select the options of sending, saving and sending, saving to draft box, saving to template box, sending option, exit, etc. after finishing the edit, Inbox Display all received MMS. If there is an MMS, user can choose the options of checking, reply, short message reply, reply to all contacts, forwarding, delete, delete all, save as a template, message details and using details about the selected MMS.
Template MMS Template includes user defined MMS and default MMS. User Defined MMS is the message saved as a template from “write message”, “Inbox”, “Outbox” or “Drafts”. Default MMS is the message installed in the phone. Show the list of user defined MMS and default MMS, the MMS can be edited. Choose “Options”, users can select to read, modify the template.
2.4 Voicemail Server The voicemaillbox of SIM card 1/2 needs to be supported and activated by your network, there are following options: Edit: You can edit 2 voice mail numbers. Call voicemail: if the user activates the voicemail box, please activate the service. 2.5 Broadcast Message This is a service provided by SIM card 1/2 information center, like weather report, travel service, etc. Users can read the messages directly.
… Light … Time: … Number: chose the option if you want the SOS light to flash during countdown how long for count down after pressing SOS key please insert the number that will be dialed in case of SOS. . ...SMS Status – further information: Select ON or OFF to activate or deactivate the SOS. When activated and the phone loses balance or SOS key is pressed, the stored SMS message is sent automatically to the SOS number. 3.
4.0 SETTINGS 4.1 User profiles The function is used for setting up the mobile phone to remind incoming calls and short messages in different ways under diffrent enviroments. Choose mode and go to customize by using the upper/lower key: 4.1.1 General mode The default mode is the normal mode without any customization, and the user can chose the general mode and customize the settings, which includes: (1) Activate：set the general mode as the default mode.
4.1.2 Meeting mode Under this mode, the phone only vibrates, no ringtone or keytone, please refer to general mode settings for the specific setting. 4.1.3 Outdoor mode The default ringtone volume is level 7 under this mode, please refer to general mode settings for the specific setting. 4.1.4 Indoor mode The default ringtone volume is level 3 under this mode, please refer to general mode settings for the specific setting.
4.2 Dual SIM settings Dual SIM open SIM card 1 and SIM card 2 both open. Only SIM card 1 open Close SIM card 2, only open SIM card 1, partial menu of SIM card 2 will be hidden. Only SIM card 2 open Close SIM card 1, only open SIM card 2, partial menu of SIM card 1 will be hidden. Flight Mode When on the plane, please activate the Flight mode, calls or messages will be restricted to some extent. 4.
month-day-year. 4) Date separate mark The date is using following marks to separate them: “/”, “-”, “_”, “:”. 2. Schedule Power on/off: there are four teams of timers in total, you can edit the on/off time of the phone; and on/off option must be turned on if the users want to use this function. 3. Language： you can chose your language 4. Set the input method: set the input method as the preference input method for text editing. 5.
Power on display>System, choose the animation from phone system. Power on display>User defined, choose the animation. 4) Power off display Settings>Phone setup>Display Characteristic> Power off display, set the animation when power off. Power off display>System, choose the animation from phone system.
2. Auto adjust backlight. Press left button to set on or off. If this function is turned on, the LCD can adjust its brightness automatically according to the environment. 4.4 Bluetooth settings The mobile phone has a built-in bluetooth wireless communication function, the user can connect the phone to other bluetooth devices through the function, such as a bluetooth hands-free device, other phones or a PC which supports bluetooth wireless technology.
connecting and pairing. The code needs to be inserted when matching. The device will be listed in the device list after pairing. Notice： if the user wants to establish a connection, the bluetooth devices must use the same code (default code is 0000). Devices that do not have a user interface can use the factory-set passcode. 4.4.3 My device Display connected bluetooth information. ‘Inquiry new device’ is displayed if the mobile phone is not connected with any bluetooth device. 4.4.
Voice path settings: Set the voice to be transmitted to the phone or the bluetooth hands-free device when using Bluetooth hands-free device. 4.5 Network setup Settings>Network Setup, select SIM card 1 network settings or SIM card 2 network settings. Network selection：the network selection includes new search, select network, selection modes. to change between Manual and Automatic.
SIM card 1 lock Based on this option, you can lock or unlock the SIM card 1 with correct PIN code. Normally, SIM card 1 is locked. PIN code is provided by network operator, if the PIN code is inserted wrongly 3 times, you need to enter your PUK code to unlock the PIN code. Please enquiry with the network operator if the PUK is not provided or was lost.
Phone lock This option can set a password to the phone to lock or unlock the phone. When you set the phone password, you need to input the code first when you switch on the phone. Phone password length is 4 to 8 digits, factory password is 1122. Auto Keyboard lock This function can lock/unlock the keyboard after it is idle for 5 sec / 15 sec / 30 sec / 1 min / 5 min. and press “*” to unlock The keyboard will be locked automatically after the set time. Press left button the keyboard.
5）CALL CENTER 5.1 Call history SIM card 1 call records and SIM card 2 call records. You can check information of the call records, which includes: missed calls, dialed calls, received calls, delete call records, call timer, call charge, short message counter and GPRS flow. 5.1.
Choose “delete call logs” > ”Delete all”, you can delete all the call logs. SIM card 1 call timers Last call: display the calling time of last call Dialled calls: display the quantity for all the dialled calls Received calls: display the time for all the received calls Reset all: clear the call logs on SIM card 1. SIM card 1 Call cost Last call cost: check the cost of last call of SIM card 1.
5.2 Call settings A： SIM card 1 call settings Call ID You can choose “set by network”, “Hide ID” and “Send ID”, it needs the support from the network operator. If you choose “Send ID”, your phone number will be shown in other’s phone when they receive your call; If you choose “Hide ID”, you can not dial any number but receive calls from others. Call waiting If a new incoming call reaches when calling, the network will inform your phone, and show the numbers on the phone, you can decide to answer or not.
only then you can use the related function of the call restriction. Every item of the “call restriction” can be set switch on, switch off and search. You can restrict the calls as following: Restrict dial-up All the incoming call: restrict all of the incoming call International call: restrict dialing international call International call except domestic call: when you are in roaming, you can only dial the numbers of your home country.
Start-up all Press ok key, enter code, switch on all the restrictions of SIM1. Cancel all Cancel all set call restrictions. Code change: Enter previous call retriction Enter a new restriction code. Remark: When you apply for this function, you will get a code from the operator. Line switching Switch line 1 and line 2, you can choose Close user group: the function needs to be supported by network operator B: SIM card 2 call settings The settings are the same as for SIM card 1 call settings.
By pressing numbers 2 to 8 for a long time in the idle mode you dial your set numbers directly. Call time display Turn on and turn off the funtion to display the call time. Call time reminding turning off: turn off the function. one tone: the phone will remind you when entering any number between 1 and 3000. Cycle: input any number between 30 to 60 seconds, and the function prompts the call time in cycle (in seconds).
A．homepage Enter the default homepage. Different SIM cards have different default homepages which can be changed. B．bookmarks You can use bookmark for your WAP websites by pressing the option key on the website : （1）Enter the bookmarked website. （2）Reedit the bookmark information. （3）The bookmark address is sent to the other party by the short message mode or multimedia message mode. （4）Delete the bookmark. （5）Delete all bookmarks （6）Add new bookmark (new website).
G．Settings 1. Select SIM card: select the SIM card with internet service, also set as ‘always ask’. 2. Edit setting column： 3. Browse option: set waiting time for internet browse and whether pictures should be displayed or not. 4. Service information settings: suggest starting service information settings, you also can select service information settings, white list settings, SL settings and white list addition. 5. Clear cache: clear up mobile cache.
6.4 Calendar The function is used for checking dates. You can browse the dates by using the upper, lower, left and right arrow and the calendar information at the upper part of the screen updates accordingly. Move and check the date by pressing the direction keys. Press the left function key (option) to execute the following operations: Checking： check all events Checking all：check all added events or press the OK key to select ‘addition’ for adding a new event. Additional event: add a new memo.
Press the upper or lower key to select alarm clock and press the edit key to enter settings. 1. Press the left and right keys to open or close the alarm clock at the first line. 2. Enter alarm time in the second line. 3. Ring mode： press the left/right key to select ring modes, once, everyday, custom (set the alarm clock for every week day is required when the custom ring mode is selected, the ring mode is set as on or off according to requirement. Finally, press finish to save the settings. 4.
7. INPUT METHOD Summarize The mobile phone supports input of intelligent English, numberS and symbolS. Keypad definition Please refer to the input method explanation about the keyboard definition in the input method state.
Input method illustration English input method Keypads definition of English input (include capital and small) as below: Key name Number 0 key Number 1 key Number 2 key Number 3 key Number 4 key Number 5 key Number 6 key Number 7 key Number 8 key Number 9 key * key # key: Corresponding English letter or function 0，space Symbol ABC； abc DEF； def GHI； ghi JKL； jkl MNO； mno PQRS； pqrs TUV； tuv WXYZ； wxyz Press * key to enter into symbol input box Switch input method Explanation Use the keypads to input Gene
Each key is used for entering more letters. Press the keys quickly and repeatedly till your required character appears. Press * key to enter a special symbol like punctuation etc. Switch input method by # key. Press 0 key once in the state of capital or lowercase when you need a space. Clear input error by right soft key, and press the right soft key for a long time to clear all. Digital input method Use number keys 0-9 to input the corresponding numbers.
Select English phrase association words: association input will give the phrase association of the last word, the upper and lower navigation keys are used for scrolling the screen, left and right navigation keys find English words to be selected, and OK key selects the English words. Edit input English words: left and right navigation keys move the cursor right and left, upper and lower navigation keys move the cursor up and down, press to delete the English words.
Battery with poor contact Insufficient standby time Charging Fault Conversation failure Invalid key operation SIM card fault Assemble the battery again or clean the contact points of the battery Check or replace SIM card Low Battery performance Replace battery Poor contact Check contact conditions, replace socket or plug Battery voltage is too low Battery fault Charge it half an hour first, and then unplug to charge the battery again Replace battery Charger Model Error Replace suitable charger
Part of calls are not reached Can’t find contacts No number in the phonebook PIN code error Auto-lock code error Mobile phone power-off automatically Beyond the telephone number of digits Check with the phone number Setting problems Check whether ‘call restriction’ is set or not The SIM card is changed Use the original SIM card Setting error or too low long-time battery voltage or out of use for a long time Wrong PIN code has been entered three times wrong code entered Check whether a complete star
61
