User manual

41
connecting and pairing. The code needs to be inserted when matching. The device will be listed in the
device list after pairing.
Notice： if the user wants to establish a connection, the bluetooth devices must use the same code (default
code is 0000). Devices that do not have a user interface can use the factory-set passcode.
4.4.3 My device
Display connected bluetooth information. ‘Inquiry new device’ is displayed if the mobile phone is not
connected with any bluetooth device.
4.4.4 Active devices
The device showed in the list is active; you can select the device and cancel the pairing.
4.4.5 Settings
Visibility: Press left button to set on to allow your device to be found by other devices with Bluetooth
wireless technology, or set off to hide your device. In this way, you can better control who can find your
device with Bluetooth wireless technology, and connect to it. Do not pair with or accept connection requests
from an unknown device. In this way, you can better protect your device from harmful content.
Change device name：Edit the name shown to other devices using Bluetooth wireless technology.
Authentication：Press left button to set on, Connection requests from this device must be accepted
separately every time. Or set off, — Connections between your device and this device can be made without
your knowledge. No separate acceptance or authorisation is needed.