Owner Manual

6
d. Examine the ozone plate for cracks and make sure it’s dry on the front. The white
paste on the back is there to improve conductivity. Do not remove it.
e. When you’ve finished, replace the ozone plate so that the clip holds it securely in
place again. Reattach the bottom plate on the unit itself and replace both screws.
Do not touch any of the other internal parts of the unit.
4. Make sure that the air filter on the back is clean. The air filter is removable and washable.
Do not use heat to dry the air filter, as this could damage it.
5. Make sure the fuse is installed properly and in good condition.
a. To replace the fuse, use the latch on the right side of the fuse holder slot to open the
cover, pull the holder straight out toward you, and then remove and replace the fuse.
One spare fuse is included in your package. The fuse type is 4A, 1.25" (31.75 mm).
6. Make sure that the ozone air purifier is properly plugged into a grounded outlet to avoid
the potential for electrical shock and also to ensure proper functionality.
7. If the fan is still not operating, and/or there is no buzzing sound when the device is in
operation, immediately call Ivation customer service at 1-866-849-3049.
Specifications
• Rated Voltage: 110 V
• Rated Frequency: 60 Hz
• Rated Wattage: 88 W
Questions or Problems? Contact us!
[e-mail]
1-866-849-3049
Distributed by
C&A Marketing
114 Tived Lane East
Edison, NJ 08837
[e-mail]
Made in China
IVATION is a trademark of
C&A IP Holdings, LLC
in the U.S.
©2020 All rights reserved