Full Product Manual

ManualsBrandsIvation ManualsAir QualityIvation 11-Pint Compressor Dehumidifier and Ionizer with Continuous Drain Hose for upto 216 sq. ft., Small but Powerful

11 Pint Smart-Touch

Dehumidifier

User Guide

IVA20PDEHU

Thank you for purchasing the Ivation® 11 Pint Smart-Touch Dehumidiﬁer. This User

Guide is intended to provide you with guidelines to ensure that operation of this product

is safe and does not pose risk to the user. Any use that does not conform to the guidelines

described in this User Guide may void the limited warranty.

Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.

Box Contents

Dehumidiﬁer

User guide

Safety Precautions

• Install the unit on ﬂat and hard ﬂoor to diminish vibration or noise.

• Never immerse the unit in water or other liquids.

• Never operate the unit if the cable or other connector is damaged, or something abnormal may happen, please call customer

service for help.

• Disconnect the unit from power supply when it is not in use, or before relocating or cleaning it.

• Operate the unit only at the voltage speciﬁed.

• The unit is for indoor use only. Don’t use it for other purpose.

• Do not put heavy objects on the appliance.

• Do not tip the unit to any side as spilt water could damage the appliance.

• Never insert any object into the unit body to avoid any hazard or unit failure.

• Do not put the unit close to heat-generating devices or near ﬂammable and dangerous materials.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualiﬁed person in order

to avoid a hazard.

• The appliance must be positioned so that the plug is accessible.

• The appliance should be installed in accordance with national wiring regulations.

• The ambient temperature range for the appliance is 41°F–95°F (5°C–35°C).

• Don’t try to repair, dismantle or remold the appliance, or it may become damaged. Even changing the power cord should be done

by special qualiﬁed person.

Summary of content (5 pages)

PAGE 1
1 Pint Smart-Touch Dehumidifier User Guide IVA20PDEHU Thank you for purchasing the Ivation® 11 Pint Smart-Touch Dehumidiﬁer. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guideliness described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference.
PAGE 2
Parts A. Touch panel A B. Top air outlet C. Side air inlet D. Side panel E. Purify component B F. Turbofan G. Motor H. Condenser I. E C Evaporator F J. Temperature and humidity sensor K. Compressor D G I H J L. Float M. Reservoir N N. Filter K O. Back air inlet O L M Control Panel A. Ion B. Timer C. Reservoir full indicator D. Power E. Continuous mode indicator F. Humidity setting G.
PAGE 3
Operation Power: 1. Press the POWER key to turn the unit on. a. The dehumidiﬁer will automatically enter continuous mode, and the CONT icon will glow red on the control panel. b. The fan speed will automatically be set to high, and the SPEED icon will glow red on the control panel. 2. Press the power key again to turn the unit off. The fan will continue running for 10 seconds before powering off. NOTE 1: When plugged in, the control panel will glow blue.
PAGE 4
Removing Collected Water When the reservoir is full, the unit will beep 15 times and the FULL indicator will glow red. NOTE: The unit will stop operating while the FULL indicator light is on. Collected water can be removed in the following ways: 1. When the water reservoir is full, remove and empty it, as illustrated in FIG 1. 2. Continuous draining: water can be automatically emptied into a ﬂoor drain by attaching the unit to a water hose with a female threaded end (not included). a.
PAGE 5
Troubleshooting Problem The unit doesn't operate Possible Cause Solution No power supply Connect to a functioning outlet and switch on The reservoir is full Drain the reservoir and make sure it is securely in place.