User Guide

Pump Function
1. Insert and twist the 16’ hose into the pump outlet to connect.
2. Once connected, the pump function will automatically be turned on. No button or switch is needed to activate this feature.
3. Position the hose so that the unconnected end is directed to a window, drain or other area in which water can safely be
disposed of (the hose can be stretched horizontally or vertically).
4. Once connected, any built-up water will bypass the tank and be pumped out through the hose.
5. Please note that the pump will continue to function as long as the hose is connected to the pump outlet and the unit is
plugged into an electrical outlet. Even if the unit is powered off, all remaining water will continue to be pumped out.
6. In order to shut off the pump function, simply disconnect the hose.
Maintenance Guide
Make sure the unit is unplugged from wall unit before cleaning.
Cleaning the exterior
1. Wipe with clean soft cloth.
2. If unit is especially dirty, use mild detergent with a moist cloth.
3. Do NOT clean with hose or immerse in water as this may short circuit the unit causing it to malfunction.
Cleaning the air filter
The air filter is designed to filter dust and other materials from the air. When the air filter is clogged, the unit will use more
electricity to operate. For optimal efficiency, clean the air filter once every two (2) weeks.
1. Pull air filter out gently.
2. Clean with a vacuum cleaner or wash with clean water and dry with a soft cloth.
3. Carefully re-install air filter to the unit
5