User Guide

Troubleshooting Guide
Unit does not start
Make sure the dehumidifier’s plug is secured entirely into the outlet.
Check your home fuse/circuit breaker box.
Dehumidifier has reached its preset level or bucket is full.
Water bucket is not in the proper position.
Dehumidifier does not dry the air as it should
Allow enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture blocking the front or back of the dehumidifier.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are securely closed.
Room temperature is too low, below 41°F (5°C).
There is a kerosene heater or something giving off water vapor in the room.
The unit makes a loud noise when operating
The air filter is clogged.
The unit is tilted instead of upright as it should be.
The floor surface is not level.
Frost appears on the Coils
This is normal. The dehumidifier has Auto defrost feature.
Water on floor
Hose to connector or hose connection may be loose.
Intend to use the bucket to collect water, but the rear drain plug is removed.
ES, AS, P2 and EC appear in the display
These are error codes and protection code. See the CONTROL BUTTONS ON THE DEHUMIDIFIER section.
Specifications
Power: 115V~60Hz
Moisture Removal: 70 Pint (80°F/60%RH)
Refrigerant: R-410A
Current Consumption: 7.5A
Dimensions: 23.5” x 11.1” x 15.28”
Weight: 45.42 lbs.
Operating Temperature: 41°F~89.6°F
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
Customer Service:
info@myivation.com
866-849-3049
6
Distributed by
C&A Marketing, Inc.
114 Tived Lane East
Edison, NJ 08837 USA
Europe: C&A Europe
167 Hermitage Road
Crusader Industrial Estate
London N4 1LZ
United Kingdom
info@myivaton.com
Made in China
Ivation and the Ivation logo are registered
trademarks of C&A Holdings, LLC in the U.S.
©2017 All rights reserved