Miniature Evaporative Cooler SKU: IVAEAC01 User Guide
Thank you for purchasing the Ivation® Miniature Evaporative Cooler. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
SAFETY PRECAUTIONS • Make sure to familiarize yourself with the appliance itself before using it. • Before using this appliance, check all the parts to make sure they function properly, and make sure no components have been damaged. • Never immerse the cord, plugs, or any other electrical elements of this appliance in water, as this can create a risk of electric shock.
PACKAGE CONTENTS • • • Mini evaporative air cooler USB power cable User guide PARTS Back grille PRODUCT OVERVIEW Control panel Front grille Water tank PRODUCT OVERVIEW 4
CONTROL PANEL OVERVIEW USING THE COOLER USAGE Filling the Water Tank 1 Pull the water tank out from the back of the unit. 2 Use a water bottle or similar container to pour water into the tank until the water level reaches the fill line. Do not exceed the fill line. 3 Push the water tank back into the unit.
Powering the Cooler On/Off 1 Connect the USB power cable to the USB socket at the rear of the unit, and to a power adapter. 2 Press the turn it on. ON/OFF button on the top of the unit to 3 Press the turn it off. ON/OFF button on the top of the unit to USAGE Selecting a Function/Fan Speed 1 Press the LOW button on the top of the unit to set the fan speed to low. 2 Press the HIGH button on top of the unit to set the fan speed to high.
CARE & MAINTENANCE To disassemble and clean your evaporative cooler, follow these steps: Unplug the USB cable from the socket at the rear of the unit. 2 Remove the back grille, then remove the cooling pad by pulling it toward you as shown. 3 Remove the water tank by pulling it toward you and away from the unit, and drain any old/dirty water. Clean and dry the water tank. 4 Clean the cooling pad by running it under water and removing the dirt with a soft brush.
Problem Cause Corrective Action to Take The evaporative air cooler isn’t functioning, and doesn’t respond when you press the buttons. Blackout or faulty power connection. Make sure the unit is connected to a power adapter that is receiving power and providing the correct voltage. The AC fuse is damaged or the circuit has stopped functioning to prevent a power overload. Try restarting the unit or replacing the fuse. Contact Ivation® customer care if the unit still does not power on.
TROUBLESHOOTING / SPECS The pump fails to function and the cooling function does not work. Pump is damaged. Contact customer care to replace the pump. A motor connection on the pump is loose. Tighten the connection. Clogged water tray. The pump functions, but does not circulate water, or the cooling pad contains too little water. The water supply hose or pump strainer is clogged. Clean the water tray and check for clogs, remove if necessary.
Continuous Run Time: 3-5 hrs. Evaporation Rate: 10.1 - 16.9 oz/hr. (0.3 - 0.5 L/hr.) Area of Coverage: 21.5 ft2 (2 m2) LIMITED WARRANTY ON IVATION® MINIATURE EVAPORATIVE COOLER WARRANTY INFORMATION THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP.
GET IN TOUCH! WHAT DOES THIS WARRANTY NOT COVER? This limited warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any preventive maintenance; (e) modifications; (f) unauthorized repair; (g) normal wear and tear; or (h) external causes such as accidents, abuse, or other actions or events beyond our reasonable control.
