Instructions / Assembly

ManualsBrandsIvation ManualsGarden Center26 in. Rolling Snow Pusher/Shovel

ROLLING SNOW

PUSHER

USER GUIDE

MODEL #: IVASNOWPUSH

Thank you for purchasing the Ivation® Rolling Snow Pusher. This User Guide is intended to provide you with

guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that

does not conform to the guidelines described in this User Guide may void the limited warranty.

Please read all directions before using the product and retain this guide for reference. This product is

intended for domestic use only.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See

warranty for details.

TABLE OF CONTENTS

2 SAFETY PRECAUTIONS

2 BOX CONTENTS

3-6 ASSEMBLY

6 CUSTOMER SERVICE

Summary of content (6 pages)

PAGE 1
ROLLING SNOW PUSHER USER GUIDE MODEL #: IVASNOWPUSH Thank you for purchasing the Ivation® Rolling Snow Pusher. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for domestic use only.
PAGE 2
SAFETY PRECAUTIONS • The blades inside the snow pusher are very sharp and could cause injury. Do not put hands, feet, or any other appendages into the snow pusher for any reason. • If snow or ice becomes lodged in the pusher, do not reach in to try and dislodge it. Use a stick or similar object. • This item should only be used by adults who are physically capable of pushing heavy objects.
PAGE 3
ASSEMBLY Step 1: Blade Assembly Install the arms (E) in the back of the shovel, silver part facing inward, with R going to R and L going to L . Secure arms with the plates (G), bolts (F) and locknut (I) as shown in the picture below: I E I E G F G F A Step 2: Wheels Assembly Install the wheels (D) on the arms using the bolts (K). The washers (L) are to be placed both sides the of the wheels.
PAGE 4
Step 3: Handle Assembly 1. Install the lower handle (B) connecting to the inside of the arms of the blade using bolts (H) and locknuts (Q).
PAGE 5
2. Attach the upper handle (C) with screws (O) and secure with nuts (P). This part is height adjustable by mounting in higher or lower holes.
PAGE 6
Finished Product QUESTIONS OR PROBLEMS? CONTACT US! info@myivation.com | 1-866-849-3049 Distributed by C&A Marketing 114 Tived Lane East, Edison, NJ 08837 info@myivation.com Europe: C&A Europe 167 Hermitage Road, Crusader Industrial Estate, London N4 1LZ, UK Made in China IVATION is a trademark of C&A IP Holdings, LLC in the US, Canada and the EU.