Product Brochure

5
These warranties only extend to the original end user and are not transferable.
In order to maintain and protect your coverage under the terms of these warranties, it is the Home Owner’s
obligation to adhere to the following:
1. Know which warranties apply to your particular vinyl ooring.
2. Keep proof of your purchase in the form of a bill, invoice or statement from your Tra󰮐cMaster retailer that
shows the date and price you paid for the vinyl ooring (including labor).
3. Understand that Tra󰮐cMaster warrants the rst quality products—which are used only for recommended
Residential use
•
—will perform properly for the stated warranty period when installed in accordance with
the Residential Installation Guide over approved substrates and underlayments and using the approved/
recommended adhesives and seam bonds/sealers. The warranty period, when valid, begins on the date
of the original installation.
• Residential use is dened as: use in living space environments (which do not have light or heavy
commercial tra󰮐c) including all areas of owner-occupied residence. If there is a question as to
the type of use that is considered “residential,” please contact your retailer prior to purchase and
installation. PLEASE NOTE that Residential warranty exclusions with respect to caster and rolling loads
due to the unusual characteristics of this type of wheel tra󰮐c.
4. Use approved/recommended adhesives and seam bonds/sealers when installing vinyl ooring, including
Roberts 2310 or R2315 adhesive, Henry 650 R adhesive and Armstrong S-761 acrylic seam sealer or
MaxGrip Installation tape if applicable.
5. Ensure vinyl ooring is installed in an environment that maintains a temperature range for 24 hours
between 65° and 85° Fahrenheit (18° and 29° Celsius) before, during and after installation.
6. Inspect ooring material prior to installation for any imperfections or manufacturing related defects.
Tra󰮐cMaster ooring receive extensive testing and visual examination in an attempt to assure your
shipped oor is always rst quality. It is the responsibility of the installer/end user to conrm the received
material is free of any obvious visible conditions that may be detrimental to the appearance and/or
performance of the product.
• Minor color, shade and/or texture variations are normal. Any variances between actual material,
product samples and/or brochures should be addressed with your retailer prior to installation. If the
retailer determines the condition “unaccepable,” the manufacturer should be informed immediately.
7. Support furniture with wide, weight-bearing, smooth non-staining plastic oor protectors or non-staining
felt pads. The protectors/pads should be at least one inch in diameter and rest at on the oor. The
heavier the item, the wider the oor protector should be. Felt pads should be inspected periodically and
maintained with respect to the amount of foot tra󰮐c to remove imbedded material to avoid abrasion.
Make sure any metal protectors are rust proof. Replace narrow dome furniture rests with the appropriate
width, weight-bearing ooring protectors.
• Chair mats designed for hard surface oors are required under all chairs and stools
with casters.
8. Perform proper cleaning and maintenance regularly and as needed. See Residential Care and Maintenance
guidelines (p.20) for details.
General Residential Limited Warranty Conditions & Owner Obligations
This document is reviewed on an ongoing basis. 4/22/14