Specification Sheet

PAGE 1
FOR SINGLE ACTING DOORS. RADIUS MUST BE CUT INTO HEAD STOP (RADIUS = PIVOT POINT TO JAMB DISTANCE 1 3/4 MIN. 1o F3T 3 et 1251 |Door & T PIVOT L, . 5 1201 3 w13 % (441 [=ES 118) (41) (10} (131 E. 5. MIN 133) 5 Sw (44) 5" r 8 MIN o " (16) (1171 SEE 1 NOTE 3 OF DOOR PIVOT DOOR LEAF = 4 1251 125) 132! 5 (76) NOTES 1. INSTALLER MUST VERIFY THAT CENTER LINE OF TOP DIVOT POINT LINES UP WITH THE CENTER LINE OF BOTTOM PIVOT POINT. BOTTOM PIVOT SET SHOULD BE MOUNTED FIRST IN MOST INSTALLATIONS.
PAGE 2
MAX DOOR WEIGHT 300 LBS. l——5" (1270 —— e w15 4n) 13, 8 SEE 16— 3. NOTE z11 33 3 5. 1861 ris '8 L -4 132) $QOF DOOR PIVOT (16) (64) e 12" % (44) 473%. (o5) 157 (44 WITHOUT WITH THRESHOLD THRESHOLD (16] 16 DOOR (35, | DOOR MIN. (30) (16-30) 16 14 ! SEE NOTE MAX 144) 4 4 4 (191 (44) DOOR 1 (19 . HOLE IN & PIVOT THRESHOLD ! SET ANCHOR PIN. GROUT [N PLACE NOTES ¢ 1. INSTALLER MUST VERIFY THAT CENTER LINE OF TOP PIVOT POINT LINES UFP WITH CENTER LINE OF THE BOTTOM PIVOT POINT. 2.