Specification

Put the swing nozzle (3) into the body (1),
screw the nut (2).
3
FLUSH SYSTEM/CHECK FOR LEAKS.
Turn on hot and cold water supplies and flush
water lines for one minute.
Check all connections at arrows for leaks.
Retighten if necessary, but do not overtighten.
2
1.Connect the two flanges (3) into the two inlets (5) . Screw them tightly.
2.Connect the body (1) to the flanges (3), do remember the gaskets (2) inside.
The two flanges (3) are adjustable inlets.
Unscrew the hexagon nut (4) on the flange (3) , rotate the flange(3) to the right the
distance and screw the hexagon thread back tightly.
You can adjust the distance from 7 3/4"to8 1/4".
3.Turn out the hexagon (6) with the washer(6) and the metal plate(7),
Use the hexagon nut to lock the faucet and sink.
1
2
3
4
5
8
1
1
3
2
6
7