User manual

Overview of menu layout
Settings in “1. Mode“ menu level
1.1 Displays
The following levels will be displayed:
- set mode, the pump-out time
- maximum pump operating time and measuring interval time
1.2 Selecting
This is used to set the work mode for the control system.
1.3 Editing
1.3.1 M1 pre-prog: pump out
Setting the pump-out time in mode 1
1.3.2 M2 pre-prog: pump out
Setting the pump-out time in mode 2
1.3.3 M3 daily pump-out time
Setting the pump-out time in mode 3
1.3.4 M3 daily pump operating time
Setting the maximum pump operating time
1.3.5 M3 daily interval time
Setting the interval time in 15-minute intervals
1.3.6 M4 (Mon - Fri) pump out
Setting the pump-out time in mode 4 from Monday to Friday
1.3.7 M4 (Mon - Fri) pump operating time
Setting the maximum pump operating time from Monday to Friday
1.3.8 M4 (Mon - Fri) interval time
Setting the interval time in 15-minute intervals from Monday to Friday
1.3.9 M4 (Sat - Sun) pump out
Setting the pump-out time in mode 4 from Saturday to Sunday
1.3.a M4 (Sat - Sun) pump operating time
Setting the maximum pump operating time from Saturday to Sunday
1.3.b M4 (Sat - Sun) interval time
Setting the interval time in 15-minute intervals from Saturday to Sunday
Settings in “2. Settings” mode level
2.1 Date & time
This is used to set the current time and date.
Note: The settings in this mode level will be saved automatically.
2.2 Delta (T) setting
This sub-level is used to set the difference in temperature between the flow and backflow temperature probes. The range can be
adjusted from 2.0°C to 10.0°C in 0.5°C-intervals. This temperature setting is used to adjust the control system of your hot water
system.
2.3 Resetting
This menu level is used to reset the device to delivery state.