User manual

OPERATING INSTRUCTIONS
SPEED REGULATOR DR-2000
For inductive and ohmic loads
Art. no. 700100
Dear customer,
Thank you very much for the trust you have placed in us. You have acquired a reliable high-quality product, which will give you
pleasure for a long time if you handle it properly.
Please read these instructions for use thoroughly and completely prior to putting the device into operation.
ATTENTION!!! Important safety instructions
- Attention ! Risk of fatal injury!!! This device has 230 VAC at the output and must never be used by children!
- The use of the product under unfavourable environmental conditions must be avoided under all circumstances.
Unfavourable environmental conditions include: ambient temperatures above 50°C, flammable gases, solvents, vapours,
dust, relative humidity in excess of 80%, and moisture.
- The device must only be operated in dry and closed rooms.
- If there is reason to believe that safe operation is no longer possible, the device must be switched off immediately and
secured against unintentional operation. Safe operation can no longer be assumed if the device is not functioning, has
visible damage, has been damaged in transport, or after storage under unfavourable conditions.
- Service and repairs may only be carried out by authorized and qualified personnel. Only original components with the cited
value must be used as spare parts.
- Only devices with a max. output of 2000 watts may be used with the speed regulator.
- Devices which are obviously defective may not be used with the speed regulator.
Description of functions
This control unit allows for adjusting the speed of a variety of devices continuously and jerkfree. In accordance with the principle
of power readjustment you thus achieve an optimum and constant speed of your tools, also under various loads.
This makes the unit perfectly suitable for operating drills, grinding devices, handsaws and jigsaws thread cutter, milling
machines or also for dimming headlights, infrared lamps and radiators.
Operation
1. Connect the speed regulator to the 230V mains.
2. Connect the electrical consumer to be regulated in switched-off condition to the socket of the speed regulator.
3. Now, switch on the electrical consumer. Set the desired speed on the speed regulator.
Technical specifications
Input voltage: 230V AC 50Hz
Max. continuous power output: 2000W
Control range: 10 – 230V AC
Control: Phase angle control
Protection type: IP40
Power cable: 1.35m
Dimensions: 190 x 112 x 75mm
Weight: 1,050g
Environmental protection note
At the end of its useful life, this product must not be disposed of together with normal household waste, but has
to be dropped off at a collection centre for the recycling of electrical and electronic devices. This is indicated by
the symbol on the product, on the instruction manual or on the packaging. The materials of which this product is
made are recyclable pursuant to their labelling. With the reuse, the recycling of the materials or other forms of
scrap usage you are making an important contribution to the protection of the environment. Please ask your
local administration office for the appropriate disposal centre.
Technical specifications are subject to change. We assume no liability for typographical errors. 06/2010
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
Tel. 09622 – 719910; fax 09622 – 7199120
Email: [e-mail] Internet: www.IVT-Hirschau.de