Caution : You must read this before you proceed Table Label Description QTY A Table Top 1 B Leg 4 Description Washer QTY 17 ② Bolt (M6*15) 17 ③ Allen Key 1 Label ① Before Beginning Assembly: Picture Picture *17 *17 Page 1 OF 4
Overview Table Top(A) Note: The point of the Legs corners should match with the Table Edges Leg(B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach Leg(B) to Table Top(A) using Bolts(②) and Washers(①) with Allen Key(③) as shown above. Repeat the same process to install the remaining three Legs(B). Do not fully tighten the Bolts. Step 3 Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, apply even steady pressure down on the Table. This action should help align all parts. Then proceed to tighten all Bolts at all joints Do NOT fully tighten a Bolt in one go and then move on to the next one.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
