Caution : You must read this before you proceed Chair Label Description QTY A Backrest 1 B Chair Base 1 C Cushion 1 Description QTY ① Allen Key 1 ② Bolt (M6*30) 5 ③ Washer 5 Label Picture Picture Page 1 OF 4
Before Beginning Assembly: Overview Backrest(A) Chair Base(B) Cushion(C) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Attach Chair Base(B) to Backrest(A) using Bolts(②) and Washers(③ with Allen Key(①). Do not fully tighten the Bolts. Step 3 Attach Chair Base(B) to Backrest(A) using Bolts(②) and Washers(③ with Allen Key(①). Tighten all Bolts at all joints in a sequential manner. Step 4 Put the Cushion(C) onto the Chair. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
