Caution : You must read this before you proceed CHAIR Label Description QTY A Seat 1 B Front Leg 2 C Hind Leg 2 Description QTY ① Allen Key 1 ② Bolt (M6*16) 13 ③ Washer 13 Label Picture Picture Page 1 OF 4
Before Beginning Assembly: Overview Seat (A) Hind Leg (C) Front Leg (B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Align the Front Legs(B) with the mounting positions on the base of the Seat(A). Ensure the Leg mounting postions(B1) match the Seat mounting pointions(B1). Attach Front Legs(B) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the picture. Tighten all Bolts in a sequential manner. Step 3 Align the Hind Legs(C) with mounting positions on the base of the Seat(A). Ensure the Leg mounting positions(C1) match the Seat mounting positions(C1).
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.