Caution: You must read this before you proceed Table Label Description QTY A Leg 2 B Table Top 1 C Connector 1 Description QTY ① Allen Key 1 ② Washer 14 ③ Bolt (M6*20) 9 ④ Bolt (M6*40) 5 Label Picture Picture Page 1 OF 4
Before Beginning Assembly: *2 Overview Table Top(B) Leg (A) Connector(C) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts on a clean, non-marring surface.
Step 2 Attach Connector(C) between Legs(A) using Bolts(③) and Washers(②) with Allen Key(①) as pictured above. Do not fully tighten the Bolts. Step 3 Stand the Table up. Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, adjust the Foot Screws at the bottom of the Legs to achieve levelness. Once the Table is level, proceed to tighten all Bolts at all joints. When tightening the Bolts, tighten sequentially. Do not tighten any Bolt fully and then move on towards the next one.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
