Assembly Instructions Caution : You must read this before you proceed Table Part List Label Picture Description QTY A Table Top 1 B Leg 2 C Table Legs Support Panels 2 Description QTY Allen Key 1 Hardware Label ① ② ③ Picture Washer Bolt( M6*20mm) 13 13 1 OF 4
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Swivel Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Place and position Table Leg to Table Top as shown in the above picture. Align the holes on the Table Leg( B) with the holes on the Support Bar of the Table Top( A).Affix the Leg(B) to theTable Top(A) by using Washer (②) & Bolt(③) with Allen Key (①). DO NOT FULLY TIGHTEN ALL BOLTS. Step 2 Align the holes in the Table Legs Support Panels( C)with the holes on the Table Leg(B). Affix the panels to the legs by using Washer (②) & Screw(③) with Allen Key (①).
Step 4 The Table is ready for use. This Table can only be used on a flat, level surface. Questions & Answers about Proposition 65 •What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
