ASSEMBLY INSTRUCTION
ASSEMBLY TIPS: 1.Remove hardware from box and sort by size. 2.Please check to see that all hardware and parts are present prior to start of assembly. 3.Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning!! 1. Don't attempt to repair or modify parts that are brokenor defective .Pleasecontact the store immediately. 2. This product is for home use only and not intended for commercial establishment.
z DESCRIPTION NO HARDWARE PACKAGE Q'TY FIGURE 1 LARGE CAMBOLT L=29mm 14pcs 2 LARGE CAMLOCK ¢15mm 14pcs 3 SMALL CAMBOLT L=2Omm 8pcs 4 SMALL CAMLOCK ET12mm 8pcs 5 SMALL CAMLOCK L=24mm 4pcs 6 SMALL CAMLOCK ET12mm 4pcs 7 SHORT DOWEL ¢8X25mm lOpcs 8 LARGE SCREW ¢4x30mm lOpcs 9 WRENCH 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 WASHER INNER HEX SCREW INNER HEX SCREW NAIL METAL SCREW EXTRA LARGE SCREW HANDLE HANDLE SCREW THE RESTRAINT STRAP PLASTIC ANCHOR SMALL S
x2 8 O x2 3 4
7 8 G B
E 6 7 5 F C F 1 7 2 9 12
H F D C I 1 2 A G H C 23 10
13 P C 14 15 K J C
HARDWARE(INCLUDED): TOOLS NEEDED ( NOT INCLUDED) DRYWALL ANCHOR ¢8X40 X lPC DRILL & DRILL BIT METAL BRACKETS 12 X 12 X 1 X 2PCS LIGHT HAMMER DRYWALL SCREW ¢5X40 X lPC STRAP 197 X 5 X 1 X lPC FLATHEAD SCREW ¢4X25 X lPC Note: Hardware included only compatible with standard drywalls. STEP 1 n l.Find spot on wall l below top of item. 2. Using a drill bit slightly thinner than anchor ,drill hole into drywall. l.Use a light hammer to tap anchor into hole. 2.Anchor should fit snugly.
