Assembly Instruction

HARDWARE(INCLUDED): TOOLS NEEDED ( NOT INCLUDED)
DRYWALL
ANCHOR
¢8X40
X lPC
DRILL
&
DRILL
BIT
METAL BRACKETS 12 X 12 X 1 X 2PCS
DRYWALL SCREW ¢5X40
X lPC
STRAP
197
X
5
X 1 X lPC
LIGHT
HAMMER
FLATHEAD SCREW ¢4X25 X lPC
Note: Hardware included only compatible with standard drywalls.
STEP 1
l.Find spot on wall
l
n
below top of item.
2. Using a drill bit slightly thinner
than anchor ,drill hole into drywall.
1. Insert drywall screw into metal
bracket and into drywall anchor.
2. Insert flathead screw into second metal
bracket and into back of item.along top edge.
l.Use
a
light hammer
to tap
anchor into hole.
2.Anchor should fit snugly. lf hole is too small,
drill again to increase hole size .Do not force
anchor into wall.
STEP 4
1. Insert strap
thru
bracket
attached to wall.
then thru bracket on item, and into head of strap.
2.pull lightly
til strap stops.
Assembly is complete.