Installation & Assembly (Desk)

ManualsBrandsIvy Bronx ManualsDesksChadron Desk

PAGE 1 OF 11

ASSEMBLY INSTRUCTIONS

ASSEMBLY TIME

PARTS IDENTIFICATION

60 MINUTES

ASSEMBLY TIPS:

1. Remove hardware from box and sort by size.

2. Please check to see that all hardware and parts are present prior to start of assembly.

3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.

WARNING!

1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.

2. This product is for home use only and not intended for commercial establishments.

NOTE:

Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.

LEFT SIDE

PANEL

1 PC

RIGHT SIDE

PANEL

1 PC

LEFT DIVIDER

PANEL

1 PC

RIGHT DIVIDER

PANEL

1 PC

LEFT BOTTOM

PANEL

1 PC

MIDDLE

BOTTOM PANEL

1 PC

RIGHT BOTTOM

PANEL

1 PC

H BACK PANEL 1 PC

I TOP PANEL 1 PC

DRAWER

FRONT PANEL

2 PCS

DRAWER BACK

PANEL

2 PCS

DRAWER LEFT

SIDE PANEL

2 PCS

DRAWER RIGHT

SIDE PANEL

2 PCS

DRAWER

BOTTOM PANEL

2 PCS

MIDDLE

DRAWER

FRONT PANEL

1 PC

MIDDLE

DRAWER BACK

PANEL

1 PC

MIDDLE

DRAWER LEFT

SIDE PANEL

1 PC

MIDDLE

DRAWER RIGHT

SIDE PANEL

1 PC

Summary of content (11 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. WARNING! 1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
PAGE 2
S MIDDLE DRAWER BOTTOM PANEL 1 PC T METAL FRAME 2 PCS U CROSS BAR 1 PC HARDWARE IDENTIFICATION Z Q’TY NO DESCRIPTION GLUE 40g 1 PC 8 GLIDES SCREW 36 PCS WOODEN DOWEL 45 PCS 9 KNOB 3 PCS CAM BOLT 20 PCS 10 KNOB BOLT 3 PCS CAM LOCK 20 PCS 11 BOLT 16 PCS LONG SCREW 16 PCS 12 LONG BOLT 2 PCS SCREW 12 PCS 13 ALLEN WRENCH 1 PC 3SET 14 STICKER 4 PCS NO DESCRIPTION 1 2 3 4 5 6 7 FIGURE Ø 8x30mm Ø 7x35.5mm SR Ø 15x12mm SR Ø 4.5x42mm SR Ø 4.
PAGE 3
STEP 1 2 x 20 3 x4 CL 7x3 CR 8 x 18 A 7 (CR) 7 (CL) B 3 8 C C 7 (CR) the reverse side 7 (CL) D the reverse side D 7 (CR) 7 (CL) INCORRECT CORRECT 2 7 (CL) Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 4
STEP 2 2 x 19 H F 2 Apply glue on all wooden dowels to ensure integrity of the structure. STEP 3 4 x4 D 14 1 Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 5
STEP 4 5 x2 H 1 14 5 Apply glue on all wooden dowels to ensure integrity of the structure. F C STEP 5 1 Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 6
STEP 6 5 G 1 5 x 14 B E Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 7
STEP 8 3 x 10 3 I STEP 9 4 x 10 14 Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 8
STEP 10-1 STEP 10-2 K 3 x4 J x2 L N L x2 M 1 M x2 2 x4 Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 9
STEP 11-1 O STEP 11-2 P 3 x2 Q S Q 1 R 2 x2 R O Apply glue on all wooden dowels to ensure integrity of the structure.
PAGE 10
STEP 12 J O J STEP 13 COMPLETE PAGE 10 OF 11
PAGE 11
") .5 (23 1200m 60 581mm(22.75") 775mm(30.5") m(47") m 0m 1027mm(40.25") 637mm(25") 206mm(8") 79mm(3") 334mm(13") 150mm(5.75") 256mm(10") 549mm(21.5") 57mm(2") 334mm(13") 94mm(3.5") 599mm(23.