Assembly Instructions Caution: You must read this before you proceed Chair Part List Label Picture Description QTY A Seat 1 B backrest 1 Description QTY ① Bolt (M6*35MM) 5 ② Allen Key 1 Hardware Label Picture
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Backrest (B) Seat (A) FRONT FACING This Chair has multiple parts and may require up to 10 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 B ① A ② Open the carton and place all the parts onto a clean, non-marring surface. Attach Backrest(B) to Seat(A) using Bolts(①) with Allen Key(②) as shown above. Do not fully tighten the Bolts. Step 2 B ① A ② Attach Backrest(B) to Seat(A) using Bolts(①) with Allen Key(②) as shown above. Do not fully tighten the Bolts.
Step 3 Stand the Chair up. Place the Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully sit onto the Chair This will help to align all parts at all joints. Then get off the Chair, and in a sequential manner, proceed to tighten all Bolts. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
