Installation & Assembly

Step 2
Insert the Leg(B) onto the Iron Bar(①) as pictured above.
Thread the Iron Bar(①) through the mounting position at the base of the Leg(B) until threading on
the Iron Bar(①) is clearly visible.
Note: The mounting position is on the bottom end of the Leg(B).
Hold and align the Leg(B), until the Leg is Square and flush with the Table corner.
Repeat this process with the three remaining Legs(B).
Step 3
Attach Leg(B) to Table Top(A) by placing a Washer(⑤) and Nut(④) onto the Iron Bar(①) and
tightening with Socket Wrench(③) & Handle(②).
Repeat the same process with the other three Legs.
Tighten the Nuts fully in a sequential manner.
4 OF 7