Instructions / Assembly

ManualsBrandsIvy Terrace ManualsOutdoors60 in. Black and Mahogany Patio Bench

Foot Qty 2

Sideframe Qty 2

Center support Qty 2

1/4-20 X 2 PHIL TRUSS

Brace1 Qty1

Brace2 Qty1

thru holes

1/4-20 X 1-3/4 PHIL TRUSS

1/4 FLAT WASHER

1/4-20 NYLOCK NUT

Arm Qty 2

Brace3 Qty1

Layout Parts

Model: IVB60

Head Slat Qty 1

Front Slat Qty 1

Phillips Head Screwdriver

(Screw gun recommended)

Slat Qty 13

Layout Hardware

Tools Needed

7/16 Socket drive

all fasteners are zinc coated

1/4-20 X 1-1/2 PHIL TRUSS

PG 1 OF 4

12/20/2012ASSEMBLY INSTRUCTIONS

14 x 3/4 PHIL TRUSS "B"

partial holes

4mm Hex key: included

.27 X 1-1/2 SOCKET WAFER B

Summary of content (4 pages)

PAGE 1
PG 1 OF 4 1 Layout Parts Model: IVB60 Head Slat Qty 1 Center support Qty 2 Front Slat Qty 1 thru holes Slat Qty 13 partial holes Sideframe Qty 2 Arm Qty 2 Foot Qty 2 Brace3 Qty1 Brace2 Qty1 Brace1 Qty1 3 2 Layout Hardware Tools Needed 7/16 Socket drive Phillips Head Screwdriver (Screw gun recommended) 1/4-20 X 1-1/2 PHIL TRUSS 26 1/4-20 X 1-3/4 PHIL TRUSS 10 4mm Hex key: included 1/4-20 X 2 PHIL TRUSS 2 38 1/4-20 NYLOCK NUT 38 1/4 FLAT WASHER .
PAGE 2
PG 2 OF 4 Assembly 1 Attach sideframes to feet using (4) 14x1 1/2" Screws 2 Attach slats to sideframes using (12) 1/4-20x1 1/2" Truss Bolts (12) Nuts and washers 3 *note - make sure partial hole is face down Attach these slats with (6) 1/4-20x1 1/2" Truss Bolts (6) Nuts and washers Attach these slats with (4) 1/4-20x1 3/4" Truss Bolts (4) Nuts and washers *note - make sure partial hole faces back of bench 12/20/2012
PAGE 3
PG 3 OF 4 4 Brace 3 Attach Head slat to sideframes and brace using (6) 1/4-20x1 1/2" Truss bolts (6) Nuts and washers 5 Attach Arm and Slat with (2) 1/4-20x1 3/4" Truss bolts (2) Nuts and washers Attach Arm, Slat and Brace (2) 1/4-20x2" Truss bolts (2) Nuts and washers Brace 2 6 Attach Front slat to sideframes and brace using (2) 1/4-20x1 3/4" Truss bolts (2) Nuts and washers Brace 1 12/20/2012
PAGE 4
PG 4 OF 4 7 Attach Center support to Sideframes using (26) 14 x 3/4" Screws 8 Attach Head slat to Center support using (2) 1/4-20x1 1/2" Truss bolts (2) Nut and washer Attach Front slat to Center support using (2) 1/4-20x1 3/4" Truss bolts (2) Nuts and washers 12/20/2012