SDS
Primary Route of Exposure: Inhalation or ingestion of dust
Health Hazard: Breathing dust from this product may cause short-term irritation of the mouth, nose, and throat.
Eye contact with dust from this product may cause mechanical irritation.
Medical Conditions Aggravated by Exposure: Long-term breathing conditions may be aggravated by exposure
to the dust from this product.
Eye Contact: Do not rub eyes, ush with running water, seek medical attention.
Inhalation: Move person to fresh air, seek medical attention.
Ingestion: While unlikely, if it does occur, seek medical attention immediately.
In Case of Spills or Accidental Release: Vacuum or scoop up material. Dispose of in accordance with federal,
state, and local regulations.
Waste Disposal: Dispose as normal refuse, or recycle as HDPE.
Storage Temperature: Store in temperatures less than or equal to 120 F. Do not store near heat, open ames, or
strong oxidants or alkalis. Store at and supported across entire span.
Respiratory Protection: None, unless machining product. A properly tting NIOSHA mask must be worn while
machining this product.
Ventilation: Machine this product only in well ventilated areas. Dust systems are recommended to reduce dust
levels.
Protective Gloves: No special equipment required.
Eye Protection: Wear safety glasses when nailing, cutting or machining this product.
Hygienic Work Practices: Wash hands before eating, drinking, or smoking.
Stability: Stable
Materials to Avoid: Strong oxidizers
Conditions to Avoid: Extreme heat
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide
Trade