User's Manual

TR-800 EVALUATION KIT USER GUIDE V1.0 CONFIDENTIAL
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. iWOW Connections Pte Ltd
reserves the right to, at any time modify the document content without prior notice.
© 2005 iWOW Connections Pte Ltd
16
7. Enter User name and Password
if applicable. Uncheck on all
three options. Click Next.
8. Click Finish to complete the
New Connection Wizard.
9. From HyperTerminal, enter the
network's APN (Access Point Name)
into the TR800 module:
AT+CGDCONT=1,"IP","APN"
and ENTER.
The APN can be obtained from
your network operator.
10. You can now connect to the
GPRS network using Windows
Dial-up connection created.
Figure 31
Figure 32
Figure 33