User Manual

14295 Rev. 1.4 9/24/04 17
Ogo Manual
5. Getting Started
5.1. Box Contents
 Ogo with SIM card installed
 Battery and charger
 Quick Start Guide
 Terms of Use booklet ( What You Need to Know )
5.2. Preparing Your Ogo
5.2.1. Installing or Removing the Battery
To install the battery:
1. Turn your Ogo over and slide off the back cover.
2. Match the battery contacts with the contacts in the battery slot. Push the battery in,
contacts side down first (Figure 7).
Figure 7: Insert Battery
3. Push the other side down to slide the battery into place.
4. Replace the back cover.
5. Make sure that the battery has been properly installed before powering on your Ogo.
To remove the battery:
1. Power off your Ogo.
2. Turn your Ogo over and slide off the back cover.
3. Remove the battery, lifting it gently from the side opposite the contacts.