User's Manual

Getting Started
Installing the Battery
1 Turn your Ogo over and remove the back cover.
2 With the battery label facing up, match the battery contacts with the contacts in the battery slot. Push
the battery in, with the contacts side down first, as shown below:
Figure 2: Installing the Battery
3 Push the other side down to slide the battery into place.
4 Replace the back cover.
Charging the Battery
Connect the charger's power plug to the charging socket on the front of your Ogo (Figure 3). Charge your
Ogo for 12 hours.
Figure 3: Connecting the Charger
Note: Make sure that the battery has been properly installed before charging or powering on your Ogo.
Powering On Your Ogo
After your Ogo is fully charged, press the Power On/Off key until the startup animation appears on the
screen.