User's Manual

Setting Phone Preferences
Use the settings on the Phone tab to configure how your Ogo will respond to various calling conditions.
Table 3: Phone Settings
Option Description
Call forwarding
The following Call forwarding options may be configured to Enable or Disable:
• Forward all calls – Ogo will re-route all incoming calls to another pre-
determined number.
• Forward if busy - Ogo will re-route incoming calls to another pre-
determined number if you are engaged in an active phone call.
• Forward if not answered – Ogo will re-route an incoming call to another
pre-determined number if you do not answer the call.
• Forward if not reachable – Ogo will re-route an incoming call to another
pre-determined number if the network cannot locate your Ogo to deliver the
call.
Activating the Query button in the four Forward configuration screens will tell
you if the option is enabled or disabled.
Cancel all – activate this option to disable all of the Forward options that have
been enabled.
Voice mailbox number
Use this option to change the phone number of the mailbox where you receive
voice messages (this number is assigned by your cellular service carrier).
Own number sending
Own number sending means that the person you are calling can read your
phone number on caller ID-equipped telephones:
• Set to On – your number can be read by the person you are calling.
• Set to Off – your number cannot be read by the person you are calling.
• Set by Network – leaves this option setting to the discretion of your cellular
service carrier (usually On).
Call waiting
When enabled, Ogo will notify you of an incoming while you have a call in
progress rather than delivering a busy signal to the new caller.
Incoming call alert
• The type of ring tone may be changed to any of the available options.
• The ring tone's volume may be adjusted.
• The vibrating option may be turned on or off.