User's Manual

EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 9-5
Communication Machinery Corporation
EmulationEngine(tm) 11a/b/g Rev 2.0.0
System date & time is THU JAN 01 00:00:44 1970
Use the "set date" or "set time" command to adjust
EmulationEngine 11a/b/g software version 2.0.0
WLAN mode .................... 802.11a
WLAN MAC address ............. 00:0b:cd:59:23:57
WLAN address mask ............ ff:ff:ff:ff:00:00
LAN MAC address .............. 00:0b:16:00:00:07
BSSID of System Under Test.... 00:60:1d:f0:de:97
The EmulationEngine is not joined with the SUT.
0 vSTAs currently in the system.
*** This EmulationEngine has not been Node Locked
*** Please enter "admin" to continue
Enter the “admin” command and enter “cmc” at the password
prompt:
CMC_EE -> admin
Password: ***
Ok
When administrative mode is activated with this command, the
CLI will prompt for the authorization code:
Please Enter EE Authorization Codes for MAC:
00:0b:16:00:00:07
CMC_EE ->
Enter your authorization code at the CMC_EE-> prompt. This
authorization code is provided on a separate sheet in your
shipping container with the EmulationEngine. If you have lost
your authorization code, please contact CMC Technical Support
(www.cmc.com).
After you enter the correct authorization code, the CLI will display
the following message.
Thank you...Authorization Codes Accepted
When this message is displayed, the keyfile is created in flash and
this procedure will no longer be required.