User's Manual

EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 4-1
CHAPTER 4: Initial Setup
For an Ethernet Port Connection
If the Command PC is attached to the Ethernet Port on the
EmulationEngine, complete the following steps to configure the
Command PC and access the EmulationEngine web-based user
interface or Command Line Interface (CLI):
1) Select Control Panel from the Start menu on the PC.
2) Double click on the Network Connections icon.
3) Right-click on the Local Area Connection icon for the Ethernet
controller that is connected to the EmulationEngine. Select
Properties from the right-click menu to display the Local Area
Connection Properties dialog.
4) Select/highlight Internet Protocol (TCP/IP).
5) Click the Properties button to display the Internet Protocol
(TCP/IP) Properties dialog.