User's Manual

EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 5-21
See "Using Load Profiles" below for more information about how to
set up a Load Profile.
If multiple monitors have been defined, use the horizontal tabs at
the top of this section of the page to select and show each monitor.
A maximum of four monitors can be defined in each scenario. The
toolbar in the top-right corner of the monitor area can be used to
define a new monitor, delete a monitor, run a paused monitor,
pause a running monitor, and clear a monitor’s display. See
"Monitors Side Bar" for more information about this section of the
page.
Range Checking/Error Messages
In the dialogs described later in this chapter, the user interface
will verify all entries that require values within a specified range. If
a field can contain a very large number, do not enter commas (,)
for values larger than 999 (e.g., use 1000 rather than 1,000). If
you use an invalid character in a field or specify a value that is not
within range, a dialog will tell you the allowable range. Example:
When an Invalid Data dialog is displayed, click “OK” and reenter a
value that is within the allowable range for the field.