User's Manual

EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 5-39
EE Id: This field is set by the system and cannot be changed.
EE Address: This field shows the EmulationEngine's IP address.
Receive Parameters
EE Polling Interval: This entry defines the interval (in milliseconds)
that the Command PC will poll the EmulationEngine for command
and control messages from the virtual stations. It can be set to a
value in the range: 250...60000 milliseconds (1 minute). If this
time expires without an expected response from the
EmulationEngine, the user interface will display "Busy" next to the
EmulationEngine icon in the toolbar. The "Busy" message
indicates that the EmulationEngine is not responding to the user
interface. Under normal conditions, the "Busy" message may
appear periodically for short periods of time. If the “Busy” message
appears frequently, you may want to increase the value assigned