User's Manual

EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 5-45
A monitor is one or more user-selected statistics counters that the
web-based user interface will collect from the EmulationEngine
and display in the user-selected format (i.e., line graph, bar graph
or table). All data collected can be exported. Monitors are based on
Linegraphs, Bargraphs and Tables. You can use these to monitor
the summary statistics of the EmulationEngine or a summary
“Master vSTA” that shows virtual station statistics across all
virtual stations.
NOTES:
1) Each scenario can include up to four different monitors.
2) Monitor values are stored in memory on the command PC. If
you run one or more monitors for an extended period of time,
available memory may become depleted and this can affect the
performance of the command PC.
Monitors->New Monitor
The New Monitor dialog is a tabbed dialog that can be used to
define predefined, summary, and summary virtual station
counters to be maintained during the execution of a test.
Monitors->New Monitor->Predefined
Use the Predefined section of the Define New Monitor dialog to
select predefined statistics counters.