User's Manual
Table Of Contents
- The Command Line Interface (CLI)
- CLI Usage Notes
- User Log-In
- User Log-Off
- CLI Commands
- System Under Test Commands
- Virtual Station Set-Up & Control Commands
- Statistics File Commands
- Event Log Commands
- EmulationEngine Commands
- association (get)
- channel (get)
- config (get)
- countrycode (get/set)
- date (set)
- eemac (get/reset/set)
- eemask (get/set)
- eestatus (get)
- exec
- factorydefault (set)
- features (get/set)
- fragmentthreshold (get/set)
- frequency (get)
- ftp
- gateway (get/set)
- hardware (get)
- help
- history
- hwtxretries (get/set)
- ipaddr (get/set)
- ipmask (get/set)
- key (del/get/set)
- keyentrymethod (get/set)
- login (get/set)
- password (set)
- ping
- power (get/set)
- quit
- rate (get/set)
- reboot
- rtsthreshold (get/set)
- sntpserver (get/set/clear)
- station (get)
- systemname (clear/get/set)
- telnet (get/set)
- time (set)
- timeofday
- tzone (get/set)
- uptime (get)
- version (get)
- 802.11b/g Commands
- Administrative Mode Commands
- Example Configurations
- CLI Editor
Communication Machinery Corporation (CMC)
6-16 Rev #/Date: 2.0.0 Beta/07.17.03
get group
This command retrieves and displays a configuration parameter or
statistics for all virtual stations in a group.
get group <id> <attribute>
<id>: Group Number (1...64). If <attribute> is “summary”, you may
specify “all” as the group number (i.e., get group all summary) to
display summary statistics for all groups.
<attribute>: The attribute of the information to get/display:
authentication: Display the group’s authentication mode (open-
system or shared-key).
cipher: Display the group’s cipher mode (wep)
count: If the group’s test mode is internal, display the configured
ping count (0...2,147,483,647)
csmode: Display the group’s connection mode (persistent or non-
persistent)
encryption: Display the group’s encryption mode: on or off
keyindex: Display the group’s shared-key index (1, 2, 3, or 4)
lp: Load Protocol: ping
mode: Display the group’s test mode (external or internal)
retry: If the group’s csmode is persistent, display the configured
Authentication/Association retry limit (1...2,147,483,647 or zero
(=no retries)).
size: If the group’s test mode is internal, display the configured
ping packet size (64...1024).
stats: Displays statistics counters for all virtual stations in a
group.
summary: Displays cumulative summary statistics for all virtual
stations in one or all groups.
target: If the group’s test mode is internal, display the configured
ping target IP address (e.g., 10.1.35.100).
timeout: If the group’s csmode is persistent, display the configured
Authentication/Association timeout in milliseconds
(1...2,147,483,647 or zero (=immediate timeout).
Example:
CMC_EE -> get group 1 csmode
vSTA 1 connection mode: persistent
vSTA 2 connection mode: persistent
vSTA 3 connection mode: persistent
vSTA 4 connection mode: persistent
vSTA 5 connection mode: persistent
5 vSTAs found