User's Manual
Table Of Contents
- The Command Line Interface (CLI)
- CLI Usage Notes
- User Log-In
- User Log-Off
- CLI Commands
- System Under Test Commands
- Virtual Station Set-Up & Control Commands
- Statistics File Commands
- Event Log Commands
- EmulationEngine Commands
- association (get)
- channel (get)
- config (get)
- countrycode (get/set)
- date (set)
- eemac (get/reset/set)
- eemask (get/set)
- eestatus (get)
- exec
- factorydefault (set)
- features (get/set)
- fragmentthreshold (get/set)
- frequency (get)
- ftp
- gateway (get/set)
- hardware (get)
- help
- history
- hwtxretries (get/set)
- ipaddr (get/set)
- ipmask (get/set)
- key (del/get/set)
- keyentrymethod (get/set)
- login (get/set)
- password (set)
- ping
- power (get/set)
- quit
- rate (get/set)
- reboot
- rtsthreshold (get/set)
- sntpserver (get/set/clear)
- station (get)
- systemname (clear/get/set)
- telnet (get/set)
- time (set)
- timeofday
- tzone (get/set)
- uptime (get)
- version (get)
- 802.11b/g Commands
- Administrative Mode Commands
- Example Configurations
- CLI Editor
EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 6-23
Tx Retries 0 0 0 0
Rcv Errors: 0, Tx Errors: 0
Rcv PHY Errors: 0, Excess Retries: 0
Rcv CRC Errors: 0, Total Retries: 0
Rcv Duplicates: 3, Tx Filtered: 0
Rcv Discarded: 0, Tx Discarded: 0
Ack Rcv Fails: 0, RTS Fails: 0
Rcv Decrypt Errs: 0, WEP Excluded: 0
FCS Fails: 0
reset vsta
This command resets virtual stations to the Initialized state and
clears the virtual station's statistics counters.
reset vsta <id>
<id>: Virtual Station ID (1...64) or "all". If <id> is set to all (i.e.,
reset vsta all), this command will reset all virtual stations.
Example:
CMC_EE -> reset vsta 1
CMC_EE ->
save vsta stats
This command writes all statistics for virtual stations to a file in
the flash file system. The file will be stored in the /Statistics
subdirectory and named "Vsta#Stats.dat" (where "#" is the virtual
station ID).
save vsta <id> stats
<id>: Virtual Station ID (1...64), "all", or "master". If <id> is set to
all (i.e., save vsta all stats), statistics for all virtual stations are
written to individual files. If <id> is set to "master" (i.e., save vsta
master stats), EmulationEngine statistics information are written
in the file /Statistics/VstaMasterStats.dat.
Example:
CMC_EE -> save vsta 1 stats
Wrote vSTA 1 statistics to file
CMC_EE ->
save vsta all summary
This command saves cumulative summary statistics for all virtual
stations to the file /Statistics/VstaAllSumm.dat.
save vsta all summary
Example:
CMC_EE -> save vsta all summary
Wrote vSTA all summary to file
CMC_EE ->
set vsta
This command modifies virtual station parameters.