User's Manual

EmulationEngine 11a/b/g User's Guide
Rev #/Date: 2.0.0 Beta/07.17.03 6-29
NOTE: When logging to file is enabled (i.e., set evlog file enable),
event records are automatically written to the log file as they
occur. The "save evlog" command is intended for use when log to
file is not enabled but there are significant events in the event log
buffer that you want to save to file.
Set Event Log Controls
set evlog
This command enables/disables event logging.
set evlog <mode>
<mode>: enable/disable
Example:
CMC_EE -> set evlog enable
set evlog console
This command enables/disables event logging to the console.
set evlog console <mode>
<mode>: enable/disable
Example:
CMC_EE -> set evlog console enable
set evlog file
This command enables/disables event logging to event log files.
set evlog file <mode>
<mode>: enable/disable
Example:
CMC_EE -> set evlog file enable
set evlog level
This command sets the level at which events are logged. The
verbosity level sets an “importance” threshold for events: at lower
verbosity, only more “important” events are logged; at higher
verbosity, less important events may also be logged.
set evlog level <level>
<level>: 0 or critical = Log critical events only, 1 or low = Set log
level to low verbosity, 2 or medium = Set log level to medium
verbosity, 3 or high = Set log level to high verbosity.
Example:
CMC_EE -> set evlog level 1
set evlog module
This command enables/disables event logging for specific
modules.