Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The CAN@net II/Generic enables easy and flexible access to CAN
systems via Ethernet. The device provides two operation modes,
a bridge mode and a gateway mode.
In gateway mode, the CAN@net II/Generic is connected to a PC
or controller platform via TCP/IP. It uses a simple ASCII protocol
for communication and allows uncomplicated system access via
LAN or the Internet.
By using two CAN@net II/Generic, a CAN-Ethernet-CAN-Bridge
can be realized. This allows the exchange of CAN messages
between two CAN systems via TCP/IP and provides additional
filter options.
This product is not recommended for new developments. For
new developments we recommend the use of the successor
product Ixxat CAN@net NT 100/200/420 or the CANnector.
This product is not recommended for new developments. For
new developments we recommend to use the successor product
Ixxat CAN@net NT 100/200/420 or the CANnector.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0086.10201
CAN channels (high-speed) 1
CAN bus interface ISO 11898-2, D-Sub 9 connector according to CiA 303-1
CAN bit rates 10 to 1000 kBit/s
CAN bus termination resistors None
CAN controller SJA1000T; CAN 2.0 A/B
CAN high-speed transceiver SN65HVD251P
Galvanic isolation 1 kV DC for 1 sec, 500 V AC for 1 min
Power supply 9-32 V DC, 3 W
Messages per second (send/receive) max. 21000 msg/s (with VCI, receive direction)
Bridging of large distances and easy system access using Ethernet
■
Filter and conversion functionality
■
Cost savings due to simple wiring
■
1 x CAN channel
■
Line protection by galvanic isolation
■
DATASHEET
CAN@net II/Generic