Data Sheet

FEATURES AND BENEFITS
CONTENTS OF DELIVERY
TECHNICAL SPECIFICATIONS
CANblue II
Active Bluetooth interface/bridge
1 x CAN (High-Speed)
The CANblue II is a reasonably priced and versatile CAN Bluetooth module, which can be used in a wide
range of applications due three supported operation modes.
For service applications it enables e.g. the wireless access to CAN systems using the standard Bluetooth
interface provided within many notebooks. Due to this, diagnostic data can be read or system
configuration tasks can be performed very simple and flexible, even at components which are hard to
reach.
Using several CANblue II devices network segments can be networked among each other. This enables
the reliable connection of rotating or moving parts, e.g. in wind turbines, as well as the bridging of
larger distances between different sub-systems up to 200 meters. Failure-prone slip ring connections or
expensive installations of large CAN lines can such be avoided.
Not least, the Bluetooth-based communication also offers significant advantages in terms of range and
noise immunity, compared to traditional WLAN solutions.
Quick start-up and connection

High transmission range

Low latency transmission and high data throughput

Flexible configuration options (combination of several CANblue II)

CANblue module and user's manual

CAN driver VCI for Windows

Simple CAN tool "canAnalyser Mini"

Bluetooth interface Bluetooth v4.0 with EDR, 200 m max. transmission range
Microcontroller 32-bit microcontroller
CAN controller CAN 2.0 A/B
CAN bus interface ISO 11898-2, Sub D9 plug according to CiA 303-1
Galvanic isolation 1 kV, 1 sec.
Power Supply 9 - 30 V DC, 0.6 W
Temperature range -40 °C to +85 °C
Sending delay (average) approx. 4 ms (in Shortest Latency Mode)