Data Sheet

HOW IT WORKS
Bridge mode
The bridge mode allows the user to set-up a CAN-Bluetooth-CAN bridge by using two CANblue II devices. Message exchange occurs on layer 2 and is
transparent. The device can also be used in systems with CANopen, DeviceNet or customer-specific protocols. CAN-ID filters can be set for data
exchange via Bluetooth. Using more than 2 CANblue devices, multiple busses can be linked with each other.
ASCII/Binary protocol mode
In this mode, functions for transmitting and receiving CAN messages and for configuring the CANblue II are available to the user based on simple
ASCII commands and optimized CAN binary messages. The CANblue II is ideal for "non-Windows" systems or embedded platforms.
PC operation mode with VCI driver support
Because it is supported by the VCI CAN driver, the CANblue II can be operated with all IXXAT tools and with customer-specified programs. In
addition, wireless access to CAN systems via Bluetooth can also be easily achieved with existing VCI-based application programs and tools.
ACCESSORIES
FOR THE CANBLUE II VARIANT WITH EXTERNAL ANTENNA
CAN performance at 1 Mbit 100 % bus load
Certification CE, FCC, Telec
Housing Plastic housing with mounting holes
Protection Class IP20
Size 82 x 64 x 26 mm
Antenna
Stub antenna with RPSMA plug, 90 degree tiltable. (Technical data: Length 10 cm, 1 dBi, 2,4 Ghz, 50 Ohm impedance , half wave
dipole, linear polarization.)

Magnetic foot antenna
Antenna with a strong magnetic foot for mounting, 1,5 m cable and RP-SMA connectors. (Technical data: Weight 109 g, diameter 47
mm, height 45 mm, designed for indoor use or outdoor use, provided that the antenna is protected against water and moisture.)

Screwable antenna foot
Screwable antenna foot with 2 m cable and RP-SMA connectors. (Technical data: Weight 80 g, diameter 28 mm, height 20 mm,
diameter of the mounting hole 20 mm + 0.2 mm, designed for indoor use or outdoor use, provided that the antenna is protected
against water and moisture.)
