Datasheet

Table Of Contents

V1.0

www.ixxat.com

Page 1 of 3

The Ixxat CANblue II is a cost-effective and versatile bluetooth

module for CAN systems. With its three operation modes – PC

interface, bridge and gateway – it covers a wide range of

application areas. It is ideal for mobile configuration and

analysis or for bridging CAN networks via a convenient

Bluetooth interface.

By using multiple CANblue II devices, network segments can be

easily connected to each other, enhancing flexibility and

compatibility in various use cases. Thus, even hard-to-reach

systems can be reliably interconnected over long distances of up

to 200 meters.

An external antenna can be ordered separately for usage of the

CANblue II.

FEATURES AND BENEFITS

ORDER NUMBER 1.01.0126.12001

CAN channels (high speed) 1

CAN bus interface 1 x D-Sub 9, CiA standard pinning according to CiA 303-1

CAN performance at 1 Mbit 100 % bus load

CAN controller CAN 2.0 A/B

CAN high-speed transceiver SN65HVD251

CAN interface isolation working voltage 130 V AC/DC (continuous)

Galvanic isolation 1 kV DC for 1 sec.

Bluetooth interface Bluetooth v4.0 with EDR, 200 m max. transmission range

Output power 13 dBm, external antenna

Bluetooth output frequency 2.402 to 2.480 GHz, ISM band

Antenna External antenna, RP-SMA connector, max. antenna gain 3.4 dBi

Quick start-up and connection

■

High transmission range with low latency and high data throughput

■

Flexible configuration options (combination of several CANblue II)

■

High performance transmittion without message loss

■

For usage with external antenna

■

DATASHEET

CANblue II (for usage with

external antenna)

PAGE 1
DATASHEET CANblue II (for usage with external antenna) The Ixxat CANblue II is a cost-effective and versatile bluetooth module for CAN systems. With its three operation modes – PC interface, bridge and gateway – it covers a wide range of application areas. It is ideal for mobile configuration and analysis or for bridging CAN networks via a convenient Bluetooth interface.
PAGE 2
ORDER NUMBER 1.01.0126.12001 Maximal distance between two devices in bridge mode 200 m / 650 ft Bridge set-up time Typ. 3 to 4 sec. Bluetooth transfer delay Approx. 4 ms (average), CAN/Bluetooth or Bluetooth/CAN Microcontroller 32 bit Power supply 9 - 30 V DC Power consumption at 12 V Typ. 50 mA, max. 100 mA Dimensions 82 x 64 x 26 mm Weight Approx.
PAGE 3
PIN ALLOCATION TECHNICAL DRAWING 1 Pin no. Signal 7 CAN-High 2 3, 6 CAN-GND 2 1 2 Pin no. Signal 1 2 GND SOFTWARE SUPPORT Drivers and programming interfaces A comprehensive and stable driver and software package is available for the CANblue II, which can be downloaded free of charge from ixxat.com/support. The Ixxat driver packages for Windows (VCI) as well as Linux, VxWorks and QNX (ECI) also enable use in existing applications without software adaptation.