Instructions

Configuration as Generic PC Interface or as Bridge 19 (62)
► To transmit CAN messages to the CANblue II or into the connected CAN network, use
ASCII or binary format (see Generic Mode Network and Device Communication, p. 28).
➨ Transmission format of CAN messages is automatically matched to the received
format.
Example Message
► To transmit a CAN data frame with the Standard identifier 7FF and the data bytes
1A 2B 3C 4D 5E 6F 70 to the CAN bus, use command M SD7 7FF 1A 2B 3C 4D 5E 6F 70.
CANblue II User Manual 4.01.0126.20000 EN 3.2