Instructions

Safety Instructions 7 (62)
2 Safety Instructions
Risk of disturbances and interferences if used with WLAN at the same time!
Bluetooth
®
wireless technology and WLAN both work with the frequency of 2.4 GHz.
Caution
This equipment emits RF energy in the ISM (Industrial, Scientific, Medical) band.
Make sure that all medical devices used in proximity to this device meet appropriate
susceptibility specifications for this type of RF energy.
The CANblue II contains a small radio transmitter and receiver. During communication with
other Bluetooth products the CANblue II receives and transmits electromagnetic fields
(microwaves) in the frequency range 2.4 to 2.5 GHz. The output power of the radio transmitter
is very low. The exposure to transmitted RF energy while using the device is well below the
prescribed limits in all national and international RF safety standards and regulations.
2.1 Information on EMC
Risk of interference to radio and television if used in office or home environment!
Use exclusively included accessories. Use exclusively shielded cables.
Make sure that the shield of the interface is connected with the device plug and the
plug on the other side.
2.2 General Safety Instructions
► Protect product from moisture and humidity.
► Protect product from too high or too low temperature (see Technical Data, p. 53).
► Protect product from fire.
► Do not paint the product.
► Do not modify or disassemble the product. Service must be carried out by HMS Industrial
Networks.
► Store products in dry and dust-free place.
CANblue II User Manual 4.01.0126.20000 EN 3.2