Manual
Table Of Contents
- 1 User Guide
- 2 Safety Instructions
- 3 Scope of Delivery
- 4 Product Description
- 5 Installation
- 6 Configuration as PC Interface with VCI Driver
- 7 Configuration as Generic PC Interface or as Bridge
- 8 Operation
- 9 Errors and Troubleshooting
- 10 PC Interface with VCI Driver Network and Device Communication
- 11 Generic Mode Network and Device Communication
- 12 Technical Data
- 13 Default Settings
- 14 Support/Return Hardware
- 15 Disposal
- A Regulatory Compliance
- B Disposal and recycling
- C Measurements
- D Configuration Examples
Installation 12 (64)
5.3 Installing the Virtual COM Port
The CANblue II provides two virtual servers: Config and SPP. For the configuration of the
CANblue II a Bluetooth-capable device that supports the serial port profile (SPP) must be
connected to the Config server via a virtual COM port.
Windows 7, 8 and 10
► In Windows task bar right-click on the Bluetooth icon and select Add a device.
→ All available devices are displayed.
→ CANblue II devices are named Ixxat CANblue II ([MAC address]).
Fig. 3 Add a device
► Check the MAC address of the CANblue II that is printed on the back of the device.
► Select the device to connect and click button Next.
Fig. 4 Add a device
CANblue II User Manual
4.01.0126.20000 3.4 en-US