Manual

Installation 9 (18)
6 Installation
6.1 Mounting the Device
Fig. 2 Mounting on DIN rail
► Make sure that the lock time is configured (see Configuration, p. 7).
► Make sure, that the device is not connected to power supply.
► Hook the device onto the upper lip of the rail and push downwards (1).
► Push the device towards the rail until it snaps into place (2).
6.2 Connectors
Fig. 3 Connectors
1 CAN 1
2 CAN 3
3 Power
4 CAN 2
5 CAN 4
The CAN connectors and the power connector are fixed and can not be removed.
1
2
3
1
2
4
5
CAN FD Repeater User Manual
4.01.0210.20000 1.4 en-US