Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The Ixxat CAN-IB200/PCIe is an active PCI Express interface card
with two CAN channels and galvanic isolation. It is an easy and
cost-efficient way to connect computers to a CAN bus network.
The active card has a modular design and can be expanded by
additional modules to cover the entire range of field buses, such
as CAN (ISO 11898-2), fault tolerant CAN (ISO 11898-3) and LIN,
which gives highest flexibility for future requirements.
Galvanic isolation reliably enhances the protection of the device
against damage to electronics caused by voltage peaks.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0233.22001
CAN channels (high speed) 2
CAN bus interface 2 x D-Sub 9, CiA standard pinning according to CiA 303-1
CAN bit rates 10 kbit/s to 1 Mbit/s (high-speed), 10 kbit/s to 125 kbit/s (low-speed)
CAN bus termination resistors None
CAN controller Internal; CAN 2.0 A/B
CAN high-speed transceiver SN65HVD251
Galvanic isolation 1 kV DC for 1 sec.
CAN propagation delay (typical) With galvanic isolation typical 6 ns, max. 10 ns
LIN transceiver TJA1020T, via optional fieldbus expansion
PC bus interface PCI express (V1.1), single lane port (x1)
PC addess range/ Interrupts Plug & Play
Power supply Via PCIe socket (3.3 V DC)
Power consumption Typ. 550 mA
Active CAN interface card with powerful 32 bit microcontroller
■
Easy expandable via field bus expansion board for Low-Speed CAN, LIN
or up to two CAN high-speed channels
■
2 x CAN channels
■
Standard slot bracket
■
Galvanic isolation
■
Common driver interface for easy exchange of the PC interface type
■
Powerful programming interface for Windows (VCI) as well as for Linux
(socketCAN or ECI), QNX and VxWorks (ECI)
■
DATASHEET
CAN-IB200/PCIe