Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The Ixxat CAN-IB600/PCIe is an active PCI Express interface card
with two CAN/CAN FD channels and galvanic isolation. It is an
easy and cost-efficient way to connect computers to a CAN and
CAN FD bus network.
The card has a modular design and can be expanded by
additional modules which gives highest flexibility for future
requirements.
Galvanic isolation reliably enhances the protection of the device
against damage to electronics caused by voltage peaks.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0233.22010
CAN FD/CAN channels 2
CAN bus interface 2 x D-Sub 9, CiA standard pinning according to CiA 303-1
CAN bit rates 10 kbit/s to 1 Mbit/s (high-speed), 10 kbit/s to 125 kbit/s (low-speed, via
optional fieldbus expansion)
CAN FD bit rates Arbitration rate: up to 1000 kbit/s, data rate: up to 8000 kbit/s (verified
by testing). User defined bit rates are possible.
CAN bus termination resistors None
CAN controller Internal; CAN 2.0 A/B
CAN high-speed transceiver SN65HVD251
CAN low-speed transceiver TJA1054, via optional fieldbus expansion
Galvanic isolation 1 kV DC for 1 sec.
CAN propagation delay (typical) With galvanic isolation typical 6 ns, max. 10 ns
LIN transceiver TJA1020T, via optional fieldbus expansion
PC bus interface PCI express (V1.1), single lane port (x1)
Active CAN FD interface card with powerful 32 bit microcontroller
■
Easy expandable via field bus expansion board for switchable CAN
low-speed or LIN channels
■
2 x CAN channels (CAN high-speed or CAN FD)
■
Single Lane (x1) PCI Express Interface
■
Galvanic isolation
■
Common driver interface for easy exchange of the PC interface type
■
Powerful programming interface for Windows (VCI) as well as for Linux
(socketCAN or ECI), QNX and VxWorks (ECI)
■
DATASHEET
CAN-IB600/PCIe