Datasheet

V1.0
www.ixxat.com
Page 1 of 3
The CANbridge NT 200 is a CAN to CAN bridge/gateway that can
be used to connect two CAN systems and control the message
exchange by applying rules and functions to these messages.
It thus also enables easy coupling of CAN networks, conversion
of networks with different bit rates or frame formats (11/29 bit
identifiers), and manipulation, evaluation, filtering and routing
of CAN messages.
It has a powerful microcontroller that can perform message
filtering, ID translation and data multiplexing (e.g. required for
converting CAN FD to CAN messages) and can also handle bursts
with higher data rates without message loss.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0331.20000
CAN channels (high speed) 2
CAN bus interface CAN high speed according to ISO 11898-2:2016
CAN bit rates 5 to 1000 kBit/s
CAN bus termination resistors None
Galvanic isolation 1 kV DC for 1 sec
Power supply 9 V to 36 V DC with overvoltage and polarity protection
Messages per second (send/receive) 30000-40000 msg/s
USB Interface Mini USB port to connect the device for configuration.
Power consumption at 24 V Typically 110 mA
Power consumption at 12 V Typically 220 mA
Supply voltage 9 V to 36 V DC with overvoltage and polarity protection
Easy coupling of CAN systems and devices
■
Allows system expansion and tree/star topologies
■
Cost savings due to simple wiring
■
Increased system reliability
■
Line protection by galvanic isolation
■
Powerful filter, ID translation, data mapping and multiplex
functionalities
■
Execution of pre-defined actions using event-triggered "action rules"
■
Windows configuration tool for easy configuration via USB or Ethernet
■
DATASHEET
CANbridge NT 200