Manual

Operation
20 (26)
7.2.3 User LED
Indicates the primary application status and can be configured with user defined settings via
Action Rules. See User Manual CAN-Gateway Configurator for more information.
7.2.4 CAN LED
CAN 1-4 LEDs indicate the status of the corresponding CAN interface.
LED state
Description
Comments
Off
No CAN communication No connection to CAN
Orange flashing Indicates a state of the automatic
baud rate detection
See User Manual CAN Gateway Configurator
Green flashing
CAN communication
LED is triggered with each CAN message
Green CAN communication
Device in Operational state, no messages on CAN bus
Red flashing
CAN communication, CAN
controller in Error state
CAN controller in Error Warning or Error Passive state,
reception/transmission of CAN messages possible
Red Bus off CAN controller is in Bus Off state, no CAN
communication possible
CANbridge NT User Manual
4.01.0331.20000 1.9 en-US